1. Easy to use: simply connect the transmitter in series with the circuit or wire under test, (i.e.: in place of a blown fuse, across a connector,in series with an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the tracers flexible probe to find the trouble spot
2. 42 V Ready: for use in the new generation of vehicles with mixed or single 42 Volt systems
3. Operates on DC voltages from 6 to 42 volts
4. 7inch flexible probe allows reaching wires in congested places. Transmitter and Receiver LEDs show open or short circuit conditions
5. Adjustable sensitivity for all tracing situations.No wire piercing required, non-contact technology!

EM415PRO detects and alerts you immediately where a circuit is open.You can quickly and easily Locate short circuits,open connections,broken wires,current leaks and even trace wires.You can also find intermittent circuit problems by flexing wires or connectors and listening for a change in the receiver tone Allowing you general tracing or pinpointing the problem location.It also shows you the direction to the short with its direction indicator,eliminating the guesswork. This professional tool will work on all kinds of circuits with voltages between 6 and 42 volt DC
Quickly and easily locate short circuits
Judge continuty of the cables or wires.
Track the cables or wires, and diagnose the break point
Item Type:Electrical Testers & Test Leads
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas. Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from the wire in a range of positions. However,for the best possible range the Receivers probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and eithe