Airbot Mini Carrier Board Set Specifications
Compatible with all Cube autopilots. The Mini carrier board encapsulates all wiring in a 50.5x57.5mm board, in order to save space and weight for applications with have size limits.
FEATURES :
- Dual power inputs (redundant power with automatic switch to the second power source when first one fails)
- Easy to install on drone (see the mounting pattern above)
- Power distribution & voltage protection (providing current to each connector)
- Motor PWM signal distribution (up to 8 motors - distributed on corners)
- Standard 2.54mm servo PPM/S.BUS/Spectrum RC input (+5v/+3.3v selectable power from carrier board)
- AUX VCC pins are connected together. This allows powering the AUX rail externally.
Airbot Power Distribution Board Specifications：
The Airbot Power Distribution Board Set can be installed directly under Airbot Mini carrier board set. The PDB allows up to 180A through ESC interface and four pairs of low power pads (2 on top/ 2 on bottom). The mounting hole are aligned with Airbot carrier board, so the board can be stacked together while separated by small nylon spacers.
Included
- 1x Airbot Systems Mini Carrier Board （optional）
- 1x Airbot Power Distribution Board（optional）
