Item: R300 Desoldering Braid Welding Remover Copper Solder Wick
Width: 1.5/2.0/2.5/3.0/3.5/mm
Length: 1.5m
Material: copper wire
Color: as shown
How to use the "Tin Absorption Belt"?
When removing the soldering spot solder, firstly dip the front of the soldering strip with rosin, and then place the soldering strip on the solder joint that needs to be unsoldered, and then place the electric iron on the soldering strip.
The solder joints are heated, so that when the solder is melted, it will be sucked away by the tin absorption belt, and the purpose of desoldering is achieved.
If the solder is not completely sucked off at one time, it can be sucked repeatedly many times until the components can be removed.
After de-soldering, cut off the tin strip that has absorbed the solder to prepare for the next use.
Care should be taken to avoid scalding yourself with the heated suction tape when using the suction tape.

Notes:
1. Please allowed 1-3mm differences due to manual measurement, thank you!
2. Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.

Package list:
1 * desoldering wick