Specifications:
Battery Type: 1x 9V battery (Not Included)
Item Weight: 0.3kg
Hardware Version: OEC-T5
Software Version: EL-50448
Material Type: ABS
Color: Black + Orange
How to use EL 50448 TPMS Activation Tool:
Step 1:
Enter leaning mode
Set the gearshift lever to "P"
Put the ignition switch to “ON”
Enter the interface of tire pressure display by DIC
DIC shows "Press Set / Ctrl to re-learn"
Press “Set / Ctrl”
The turn signal light is on for 3 seconds and the horn beeps twice to enter the learning mode
Step 2:
Read tire pressure sensor information
Start from the front-left wheel,
Place the EL-50448 Tool antenna up against the valve core, close to the rim and tire sidewall
Press the Start Button
The tire pressure sensor information is successfully read when the horn bleeps once
Step 3:
Same method to read other tire pressure information
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.
Turn signal lights turn on for 3 seconds and the horn bleeps twice when the learning is complete.
Tire Pressure Monitor Sensor TPMS Activation Tool EL-50448 OEC-T5
For vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.
Packaging includes
1x EL-50448 Tire Pressure Reset Instrument
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.