1. Introduction
This is a DIY Heart Shape breathing lamp kit parts . You need solder it by yourself.
2.Parameter
NO. | Parameters | Value |
1 | Name | Heart shape led |
2 | Operating voltage | DC 4.5-5V |
3 | Difficulty of welding machine | Easy |
4 | Circuit board size | 108*98*17mm |
5 | Light color | Colorful |
6 | Power supply mode | USB |
7 | Circuit board material | 1.6mm RF-4 |
8 | Board color | Green |
3. Warm tips
This is the delivery suite of parts, you need welding installation. SCM has written code, successfully tested.
4. Remote control instruction
5.Component listing
NO. | Component Name | PCB Marker | Parameter | QTY |
1 | Ceramic Capacitor | C1,C2 | 27pf | 2 |
2 | 5mm LED | D1-D31 | RGB | 31 |
3 | 3mm LED | D33-D63 | Blue | 31 |
4 | HX1838 Infrared Receiver | LED_S | 1 | |
5 | 3.5mm Power Socket | P1 | 1 | |
6 | IN4007 | Q1,Q2 | 2 | |
7 | Metal Film Resistor | R | 10K | 1 |
8 | Self-Locking Switch | S1 | 1 | |
9 | IC Socket | U1 | DIP-40 | 1 |
10 | STC89C52 | U1 | DIP-40 | 1 |
11 | Crystal | Y | 12MHz | 1 |
12 | PCB | 1 |
NOTE:Users can complete the installation by PCB silk screen and component listing.
|
| ||||||||||||
