Application: For Bafang Mid-drive Motor BBS01 BBS02 BBS03/HD
Driving lights: When the switch of driving lights is turned on, the headlights and tail lights are on
Horn: When the horn button is pressed, the horn starts to work, release it to cancel
Brake light: When the brake signal line and the controller brake low voltage signal are connected normally, the brake light will light up while braking, and the brake light will go out when the brake is cancelled
Turn signal: When the turn switch of the designated direction is toggled, the turn signal of the corresponding direction starts to work and flashes, the flashing frequency is about 800ms each time
Headlight:
1. Applicable voltage range: 6V
2. Power: 59mA/2.8W
3. Luminous flux: 180-220LM
4. Horn Power: 44mA/2.1W
5. Horn Volume: 80-100dB
6. Product size: 62x50x70mm
7. Cable length: about 1.5M
Tail Light:
1. Applicable voltage range: 12-80V
2. Power: 1.5W
3. Number of light sources: 14
4. Luminous flux: 15LM
5. Product size: 132x65x40mm
6. Cable length: about 1.5M
Switch:
1. Product size: 26x53x61mm
2. Cable length: about 1.5M
colour: black
Material: plastic
Package Contents:
1 x Front Light with built-in horn
1 x Switch (horn/ front+Rear light switch/turning light switch)
1 x Rear Light (include turning light/brake light)
1 x Waterproof Quick release harness (connect between Bafang Controller and 1 To 4 E-bus harness)