1. There is no need to input the chip model, that is, it can automatically complete the functions of identifying the chip, testing and displaying the results.
2. The battery-powered version has a size of 60mm x 37mm x 15mm, and the USB interface has a size of 81mm x 23mm x 15mm, which is light in weight and super portable.
3. The power supply uses 1 AAA battery (SIZE AAA, 1.0V-4.2V can be used). The maximum working current is about 200mA under 1.2V power supply, and no power is consumed when the test button is not pressed. The usb interface power-taking type does not consume power when the test button is not pressed.
4. The test speed is fast, the test can be completed in about 0.5s and the result will be displayed.
5. Use 0.36 inch high-brightness red LED digital tube for clear display.
Use:
1. In the test range, the quality of DIP (dual in-line) packaged devices can be tested.
2. In the test range, the model can be judged according to the logic function of the tested device.
3. Can test LED display devices, including LED, nixie tube, LED dot matrix module.
4. Perform a comprehensive test on the logic function of the chip, and do not test the quiescent current, working speed and other parameters. Therefore, this product is only used for general electrical maintenance and electronic production, and is not suitable for scientific research. But this is enough to meet the needs of most situations.
Model Number: KT152 tester
Accessory Type: Battery Accessories
color:As shown
Material:plastic

Package Contents:
1 x Tester(B)
/
1 x Tester(A)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.