Brand new original DC vacuum cleaner movement,

Aluminum alloy shell, aluminum alloy fan blades,

The motor adopts 14.4 V high-power 545 motor,

The back cover has ball bearings,

Greatly increases the stability and mute effect,

The power reaches 120 W,

Using dual air outlets, the air volume is very large.

After the test voltage is 3V, it can be started.

Current 1.4A,

Using 6V voltage is really quiet

Please note: The wiring of the motor should be positive and negative. The red dot on the back cover of the motor is positive, and the other motor foot is negative. If the positive and negative connections are reversed, the suction force will drop significantly.

The following is the voltage and current of each voltage segment:

Voltage: DC3V

Current : 1.4A

Weight: 229G

Voltage: DC6V

Current : 1.6A

Voltage: DC12V

Current : 2.8A

Voltage: DC14.4V

Current : 3.5A

Power on the test machine, the maximum no-load current is about 4 A,

Therefore, the current of the power supply is required to be more than 10A.

Especially the switching power supply,

It is better to have more than 20A,

Because the switching power supply is protected when it is overloaded,

The starting current of these two models may exceed 20A.

If the current is too small,

It might even fail to start.

Remind again that these two motors must be connected to positive and negative connections.

The red dot on the back cover of the motor is connected to the positive pole of the power supply,

If the positive and negative poles are reversed,

The suction of the movement will be greatly reduced.