XL6009 automatic voltage lifting module



DSN6000AUD automatic voltage lifting module

Module nature: non-isolated boost (BOOST)

Rectification mode: asynchronous rectification

Input range: 3.8V~32V

Output range: 1.25V~35V

Input current: 3A (large), no-load 18mA (5V input, 8V output, no-load less than 18mA. The higher the voltage, the greater the no-load current.)

Conversion efficiency:<94% (the greater the pressure difference, the lower the efficiency)

Switching frequency: 400KHz

Output ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)



When the car starts, the voltage will be pulled down to less than 7V or less, and the voltage of the engine will be as high as 15V or higher at high speed.

It is difficult for electrical appliances working at 12V to work normally. This automatic voltage rise and fall module solves this problem. No matter the input voltage is 5V, 12V or 32V, the output can be stable at 12V.

Ultra-wide input voltage 5V~32V

Ultra-wide output voltage 1.25V~35V (with automatic voltage rise and fall, within the working range, any voltage input can stabilize any voltage output)

Built-in 4A high-efficiency MOSFET switch, making the efficiency up to 94%; (LM2577 current only 3A)

Ultra-high switching frequency 400KHz, smaller ripple and smaller volume. (LM2577 frequency only 50KHz)



Application field:

Vehicle voltage stabilization, solar photovoltaic power generation, wind power generation and other voltage unstable applications.



XL6009 DC-DC adjustable boost module 5-32V to 5-40V 4A with digital display



Technical parameters:

Module nature: non-isolated boost (BOOST)

Rectification mode: asynchronous rectification

Input current: 4A (large), no-load 18mA (5V input, 8V output, no-load less than 18mA. The higher the voltage, the greater the no-load current.)

Conversion efficiency:<94% (the greater the pressure difference, the lower the efficiency)

Switching frequency: 400KHz

Output ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)

Load adjustment rate: ± 0.5%

Voltage regulation rate: ± 0.5%

Working temperature: - 40 ℃~+85 ℃

Overall dimension: 65mm * 39mm * 14mm (length * width * height)



With input display indicator and output display indicator, the IN indicator lights up when the nixie tube displays the input voltage, and the OUT indicator lights up when the nixie tube displays the output voltage



Wiring instructions

IN+: input positive

IN -: input negative

OUT+: output positive

OUT -: output negative



Other instructions:

XL6009 is a high performance boost (BOOST) module with 4A switching current. The module uses XL6009E1 of the second generation high-frequency switching technology as the core chip, and its performance is far better than LM2577 of the generation technology.

The XL6009 booster module has lower cost and better performance.

With terminal blocks, it can be used easily without soldering iron, and the welding wire connection points are reserved.

With overheat protection and short circuit protection function

Scope of application:

This module can be used in the field of boosting the output voltage higher than the input voltage, such as battery, power transformer, DIY adjustable regulated power supply, 24V vehicle-mounted pen book power supply, industrial equipment step-down, 9 to 12V, 12V to 18V, 18V to 24V, etc.



XL6009 DC-DC adjustable power supply boost module has higher performance than LM2577



brief introduction

1. Brand new original XLSEMI chips, counterfeit and disassembled chips.

2. Working frequency up to 400Khz, and LC filter circuit, the output ripple is very low.

3. Imported TDK inductor reduces heat and interference to.

4. Input and output three MLCC multilayer ceramic capacitors, anti-interference stability.

5. The PCB is made of kb grade A plate material, paperboard and garbage board.

6. Built-in MOSFET, say goodbye to LM2577 built-in triode, can achieve 94% rate.

7. An enabling port is added to control whether the boost circuit works.

15W power module with enabling port



Module parameters

Module nature: non-isolated booster module (BOOST)

Input voltage: 5-32V

Output voltage: 

(1) continuously adjustable (5-50V)

(2) Fixed output (optional between 5-50V), please tell the shopkeeper when purchasing.

(3) Please contact me directly if you need higher voltage

Output current: 2. (MAX)

Input current: 4A (MAX)

Output power: natural cooling 15W, with fins 25W (MAX) actual power

Output power=input voltage * 4A * conversion efficiency

Output ripple: input 12V output 24 0 Ripple 30MV 20M bandwidth

Working temperature: industrial grade (- 40 ℃ to+85 ℃) (if the ambient temperature is more than 40 ℃, please reduce the power to use, or strengthen the heat dissipation)

Temperature rise under full load: 45 ℃

Working frequency: 400khz

No-load current: 5V to 12V 15mA, 8.4V to 12V 7mA, 12V to 24V 9mA, 12V to 36V 18mA, 24V to 48V 9mA, 24V to 36V 6mA.

Load adjustment rate: ± 0.5%

Voltage regulation rate: ± 0.5%

Dynamic response speed: 5% 200uS

Enable control port: Yes, high level 1.4V-VIN (ON), low level 0-0.8V (OFF), default high level

Short circuit protection: none (please add fuse or protection circuit at the input)

Input reverse connection protection: None, please cooperate with our reverse connection protection board or connect diodes in series at the input.

Installation method: can be fixed with screws (fixing hole 3mm), 2 fixing holes

Wiring mode: welding. After adding pins, it can be directly welded on 



XL6009 DC-DC adjustable power supply high performance voltage regulator module



1. Working frequency up to 400Khz, and LC filter circuit, the output ripple is very low.

2. Imported inductor reduces heat and interference to.

3. Input and output three MLCC multilayer ceramic capacitors, anti-interference stability.

4. The PCB is made of kb grade A plate material, paperboard and garbage board.

5. Built-in MOSFET, say goodbye to LM2577 built-in triode, can achieve 94% rate.

6. An enabling port is added to control whether the boost circuit works.



Module parameters

Module nature: non-insulated step-down module

Input voltage: 5-32V

Output voltage: (1) continuously adjustable (1.2-35V)

Input current: 4A (MAX)

Output power: natural cooling 20W, plus 25W (MAX) actual power

Output power=input voltage * 4A * conversion efficiency

Conversion efficiency: the working efficiency of measured common voltage and current (the following is for reference only)

Output ripple: input 12V output 24 0 Ripple 30MV 20M bandwidth (for reference only)

Working temperature: industrial grade (- 40 ℃ to+85 ℃) (if the ambient temperature is more than 40 ℃, please reduce the power to use, or strengthen the heat dissipation)

Temperature rise under full load: 45 ℃

Working frequency: 400khz

No-load current: typical 15mA (5V to 12V)

Load adjustment rate: ± 0.5%

Voltage regulation rate: ± 0.5%

Dynamic response speed: 5% 200uS

Enable control port: Yes, high level 1.4V-VIN (ON), low level 0-0.8V (OFF), default high level

Short circuit protection: none (please add fuse or protection circuit at the input)

Input reverse connection protection: none, please cooperate with our or input series diode.

Installation method: can be fixed with screws (fixing hole 3mm), 2 fixing holes

Wiring mode: welding. After adding pins, it can be directly welded on PCB

XL6019 DC-DC booster module



Input voltage: 3-40V

Output voltage: 5-45V

Switching frequency: 220KHz

Output ripple: 100mV

Reverse connection protection: input 40V anti-reverse connection protection

Conversion efficiency: up to 94%



1. The conventional BOOST fully integrated constant voltage output scheme is adopted, and the internal MOSFET is integrated, with few peripheral devices and low system cost;



2. Wide voltage range input, input voltage up to 35V;



3. The output voltage can be adjusted to support 40V;



4. Built-in over-temperature protection, over-current protection, a complete set of reliability protection circuit, high reliability;



5. The system conversion efficiency can be more than 90%, which is convenient for thermal design;



6. TO263-5L standard package, suitable for boost applications within 30W.



7. Connect the power supply (3-35V), the power indicator is on, and the module works normally.



8. Adjust the blue potentiometer knob (generally turn counterclockwise to increase the voltage and clockwise to decrease the voltage) and use a multimeter to monitor the output voltage until the voltage is required.



9. It is recommended to use the current within 2. when working for a long time, and add heat sink (output above 10W); Since it is a boost module, please keep the voltage difference of 1.5V small to ensure the output stability.



10. The vehicle-mounted stabilized power supply can adjust the potentiometer only by connecting the input end of the module to the power supply, and the output voltage can be adjusted at 5V-30V. It is very simple and convenient to power your mobile phone, MP3, MP4, PSP charging and other devices.



11. Power supply for electronic equipment. When the equipment needs 5V-35V power supply and the corresponding voltage power supply is in hand, this module can easily adjust the voltage to the required voltage to solve the problem.



12. The working voltage test of the system can use this module to debug the working voltage range of various voltage test systems, which is very easy and convenient.

Customer Service Policy

We are more than happy to answer any questions that you have, please contact with us and we will do our best to get back to you as quickly as possible.

Scope of business: Auto IC, Digital to analog circuit, Single chip microcomputer, Photoelectric coupling, Storage, Three-terminal Voltage regulator, SCR, Field effect, Schottky, Relays, Resistors capacitors, Light tube, Connectors, and other one-stop supporting services!

Our advantages

1: We are all own stock, with adequate supply.

2: Original authentic, product quality is guaranteed.

Please trust us, we will give you satisfactory products and services.

Due to the wide variety of electronic components. So it may not be available. If the required components are not found in the link. You can directly consult customer service and provide the type and quantity of electronic components you need.



If you like our products, please remember to leave us a Five-Star review, it is very important to us.



Thanks for coming.