1USB
Product Parameters
Input voltage range: 6V to 32V
Output voltage: The default is 5V. After the fast charge is triggered, it is automatically adjusted between 3 and 12V.
Output Power. 24W (5V, 3.4A, 9V, 2.5A, 12V, 2A, etc.)
Output voltage wired compensation
Conversion efficiency: 90% to 97%
Supports multiple fast charging protocols
Input overvoltage, undervoltage protection
Input over-current protection
Output overcurrent and short circuit protection
Over temperature protection
Support fast charging protocol
for BC1.2, iPhone, Samsung agreement
for Qualcomm QC2.O and QC3.O
MTKPEI.1/PE2.O
Fast Charge Protocol FCP
Star Fast Charge Protocol AFC
Spreadtrum Fast Charge Agreement SFCP
Applications
Solar panel to mobile phone charging
Car charging retrofit
Driving recorder power supply
Home power conversion
2USB
Product Parameters
Dual-port independent output, support protocol: QC2.0, QC3.0, MTK PE1.1/2.0, FOR Apple, FOR Samsung AFC,FOR Huawei FCP, FOR Spreadtrum SFCP
Input voltage: DC 6~30V
Output voltage: default 5V, adjust range 3~12V according to fast charging protocol
Output capacity: single-port rated current 2.4A, rated power 24W
Protection measures: Output overvoltage protection, limit the output voltage does not exceed 13V (in the case of chip failure); input with a fuse.
4USB
Features
four road every support QC 3.0 quick charge agreement, all the way to support fast filling at the same time, can output 5V and 9V 12V (mobile phone protocol support) voltage, output current adaptive, single channel power 24W, 4-way module maximum power 96W, PCB the FR - 1.64 mm thickness design, optimize the layout, design the beat, the back window cooling, full load working temperature is low, standby current is 0.013A, the module has the function of the output voltage compensation.
Note: this module is a 4-way voltage drop type quick charge module, please use 12V-30V DC power supply, positive and negative poles can not be connected in reverse.
Product Functions
1. Built-in synchronous switch buck converter chip
2. Input voltage range: 4.5V to 32V (input voltage must be higher than output voltage because it is a voltage drop module)
3. Output voltage range: 3V to 12V, automatically adjusted according to the fast charging protocol
4. Output power: maximum 24W (4V-3.6A, 5V-3.4A, 9V-2.5A, 12V-2A, etc.)
5. Wired compensation of output voltage
6. The output has CV/CC characteristics (output current is less than the set value, output CV mode;
Output current greater than the set value, output CC mode)
7. The highest conversion efficiency is 97%
8. Soft start function
9. Switch frequency of 220KHz
Output quick charge
1. Support BC1.2, Apple and samsung agreements
2. Support qualcomm QC2.0 and QC3.0
3. Support MTK PE1.1/PE2.0
4. Support huawei fast charge protocol FCP
5. Support samsung fast charge protocol AFC
6. Support spreadtrum fast charge protocol SFCP
Multiple protection, high reliability
1, output overcurrent, input overvoltage, input undervoltage, output short circuit protection
2. Over-temperature protection of the whole machine
3. ESD 4KV, dc withstand voltage 48V
Using
Car charger, fast charger adapter, smart charger, solar charger, etc
All four USB channels support fast charge protocol and can output 5V 9V 12V voltage.
The output voltage of USB depends on your device. The output voltage of different devices is different. The output voltage of conventional USB is 5V.