Millions of stocks in stock,
if you don’t find the size you need, please contact us.
TC Type
Rubber covered OD to increase the OD sealing capability.
Suitable for soft alloy, plastic, steel or cast iron housing materials.
The temperature range is depending on the material.
!!! - HAZARDOUS FUMES
Safety precautions for fluoro rubber and Polytetrafluoroethylene
Fluoro rubber (FKM) and Polytetrafluoroethylene (PTFE) are very stable and harmless up to normal operating temperatures of 200 °C (390 °F). However, if exposed to temperatures above 300 °C (570 °F), such as fire or the open flame of a cutting torch, FKM and PTFE give off hazardous fumes. These fumes can be harmful if inhaled, as well as if they contact the eyes. In addition, once the seals have been heated to such temperatures, they are dangerous to handle even after they have cooled. Therefore, they should never come in contact with the skin.
If it is necessary to handle bearings with seals that have been subjected to high temperatures, such as when dismounting the bearing, the following safety precautions should be observed:
Always wear protective goggles, gloves and appropriate breathing apparatus.
Place all off the remains of the seals in an airtight plastic container marked with a symbol for “material will etch”.
Follow the safety precautions in the appropriate material safety data sheet (MSDS).
If there is contact with the seals, wash hands with soap and plenty of water and, if contact has been made with the eyes, flush eyes with plenty of water and consult a doctor immediately. If the fumes have been inhaled, consult a doctor immediately.
The user is responsible for the correct use of the product during its service life and its proper disposal. MOCHU takes no responsibility for the improper handling of FKM or PTFE, or for any injury resulting from their use.
