PXL-8 8 Loops Guitar Programmable Effect Pedal Looper Switcher Router Looping System WAVE-X For Boss Mooer

Features:

The PXL8 Channel FX Switching System is a floor based switching system
It is compact, easy to use and has a fully programmable memory.
PXL8 can store up to 32 combinations of effects.

Usually effects pedals are connected one by one to each pedal in series. You turn `ON` or `OFF which ever pedal you want to use. If the amount of pedals used is increased this operation becomes very cumbersome especially in live performances. This problem is also known as `tap dancing`. Making beautiful music and smooth transitions between effects is greatly reduced if you have to turn 3 effects at one time or accidently hit the wrong effect.

The PXL series of pedals are designed precisely to stop your `tap dancing`. It makes switching multiple effects more efficient at one click away.
- 8 effect loops (numbered as `L1` to `L8`)
- 4 preset buttons (A,B,C,D).
- BANK UP and BANK DOWN buttons allow you to scroll through the 8 banks of 4 customisable presets. That`s 32 effect combinations!
- Takes standard negative center 9 Volt DC power supply (sold separately)

OPERATION IONSTRUCTIONS

It is very simple to use the PXL series FX Pedal grouping system. Please follow the instructions below to start your sound.

Pre-Setup:

1.Connect your effect pedals to the L1-L8 (L1-L4 on the PXL4) FX Loop.
Connect the SEND Jack to the FX pedals INPUT jack, and connect the RETURN Jack to the FX pedals Output Jack.
2.Connect your guitar to the PXLs INPUT jack.
3.Connect the PXL from the OUTPUT to your amplifier`s INPUT.
4.Connect the PXL power supply and also power on all your effects pedals,turn on all the FX pedals connected in the PXLs FX LOOP.
5.Power your amplifier on.
6.All the 8 LOOP channel of PXL is set to BYPASS mode and the group stauts indicator will flash after powered up, This means you have to choose one FX combination to start your sound.
7. Use the A/B/C or D switch (A/B switch only in PXL4) to turn on/off the effect group you select. By repeatedly pressing any one of those switches, you bring the unit in and out of BYPASS modee.

NOTE:While in Bypass modee, you can not perform an EDIT operation.

8.The BANK+ and BANK- switches allow you to toggle between banks. There are eight banks
(1-8) available in the PXL. When any bank is changed, the group will not be switched until one of the A/B(C/D) buttons is pressed.

NOTE: You can not perform an EDIT operation during Bank Change until you make a selection of one combination by pressing the A/B/C/D button again.

GROUPING OPERATION OF PXL

1.Press the EDIT button to enter the edit mode. In edit mode, an "L" will first appear on the display indicates you are now dealing with the lower 4 LOOP channel of PXL8 (L1-L4).

You can press the `BANK- switch to switch the editing group to the uper 4 LOOP channel of PXL8,and a `H will appear on the display.

2.PXL has 8 FX loop channels, but here we have only 6 control switches can be use. That means we have to find a way which we can perform edit operation to all the 8 FX loop channels. Here is the magic. We have the 8 Loop channels into 2 groups, treat L5-L8 as higher 4 loop channel, L1-L4 as lower 4 loop channel, and use the `BANK- switch to select the higher or lower 4 Loop group you want to edit. When you press the `BANK- switch and choose the higher 4 Loop groups to edit,a `H will on the LED display, indicats you are now editing the L5-L8 Loop channel. While choosing the lower 4 Loop groups, a `L will on the LED display, indicates you are editing the L1-L4 Loop channel.

3.Once the desire Loop group is selected, use A/B/C or D foot switch to switch the FX signal Loop On or Bypassed.

If the higher group is selected:

Foot switch A controls the signal to through over the L8 channel or bypassed, and, if L8 channel is set as ON, the corresponding Effect Status Indicator of L8 will be turned On. If L8 is set as Bypassed, the corresponding Effect Status Indicator of L8 is turned Off.

Foot switch B controls the signal to through over the L7 channel or bypassed, and, if L8 channel is set as ON, the corresponding Effect Status Indicator of L7 will be turned On. If L7 is set as Bypassed, the corresponding Effect Status Indicator of L7 is turned Off.

Foot switch C controls the signal to through over the L6 channel or bypassed, and, if L6 channel is set as ON, the corresponding Effect Status Indicator of L6 will be turned On. If L6 is set as Bypassed, the corresponding Effect Status Indicator of L6 is turned Off.

Foot switch D controls the signal to through over the L5 channel or bypassed, and, if L5 channel is set as ON, the corresponding Effect Status Indicator of L5 will be turned On. If L5 is set as Bypassed, the corresponding Effect Status Indicator of L5 is turned Off.

If the Lower group is selected:

Foot switch A controls the signal to through over the L4 channel or bypassed, and, if L4 channel is set as ON, the corresponding Effect Status Indicator of L4 will be turned On. If L4 is set as Bypassed, the corresponding Effect Status Indicator of L4 is turned Off.

Foot switch B controls the signal to through over the L3 channel or bypassed, and, if L3 channel is set as ON, the corresponding Effect Status Indicator of L3 will be turned On. If L3 is set as Bypassed, the corresponding Effect Status Indicator of L3 is turned Off.

Foot switch C controls the signal to through over the L2 channel or bypassed, and, if L2 channel is set as ON, the corresponding Effect Status Indicator of L2 will be turned On. If L2 is set as Bypassed, the corresponding Effect Status Indicator of L2 is turned Off.

Foot switch D controls the signal to through over the L1 channel or bypassed, and, if L1 channel is set as ON, the corresponding Effect Status Indicator of L1 will be turned On. If L1 is set as Bypassed, the corresponding Effect Status Indicator of L1 is turned Off.

4. When you have done the grouping operation, press the STORE button to store your setting. If you don`t want to change anything, press the EDIT button again to return to the previous settings. Doing this will cancel any of the changes you have made without saving them.

Specifications:

Dimensions :44(L)x8.2(W)x5.5(H) cm
Weight : 1.34Kg
colour:black and purple