For erasing EPROM memory chips, all data in EPROM can be completely erased in 10 minutes. When using, first remove the light-shielding sticker on the EPROM memory chip window. The eraser can erase up to 6 chips at the same time. Set the timer at 10 minutes and turn on the power. If the erasing is not clean, you can extend the erasing time. Please use the programmer to check the chip before programming.
Note that the chip is placed with the glass window facing upwards. Some manufacturers chips will take a long time to erase. Please refer to the chip manufacturers instructions for details. If the chip is aging, the erasing time will be long or cannot be erased.
Drawer structure, drawer size (length, width and height): 95X55X13 millimeters (mm)
Built-in ultraviolet lamp, the wavelength of the light source is less than 400nM (it can be used for the development of some photosensitive materials or the light curing of small prints). The specific effect is subject to actual use. We cannot promise and guarantee.

Working voltage: AC 100V-240V.
Power requirement : AC 110-220V±20%
Working Frequency : 43Hz-57Hz
Working Temperature: -10°C - 40°C
Working Humidity: 20%~90% relative
Plug Type :EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.
Colour:As Shown
Material:plastic

Package Contents:
1 x Eprom Eraser