Headphone model: IRO-T10, charging box model: IRO-B10

Model: Honor Earbuds 3 Pro

Category: TWS bluetooth headset

Bluetooth: Bluetooth 5.2 backward compatible

Frequency range: 2402MHz-2480MHz

Charging standard: 5V DC/1.2A

Noise Cancellation Type: Active Noise Cancellation

Charging method Wired: USB Type-C (5V/1.2A and above), supports wireless charging: up to 2.5 W

Charging port Headphones: Charge via Pogo Pin of charging case; charging case: USB-C port

Dual device connection, body temperature measurement, active noise reduction, transparent transmission, intelligent dynamic noise reduction, ANC ear canal adaptation, call noise reduction

Battery capacity Single headset: 42mAh (rated capacity); charging case: 410mAh (rated capacity)

button

1. When using for the first time, open the cover and automatically enter the pairing mode, the white light flashes, and the charging box is turned on;

2. When using it again, put the headset into the box and keep the cover open, press and hold the function key for more than 2 seconds, the white light will flash, and the headset will enter the pairing state;

3. Put the earphones into the box and keep the box cover open, press and hold the function button for more than 6 seconds until the red light flashes, the earphones will be restored to factory settings, and all pairing information will be cleared;

4. Press and hold the function key for more than 10 seconds, the charging box will restart and reset.

Microphone: three silicon microphones

Speaker: ø11mm moving coil + ceramic tweeter

Temperature Working temperature: 0℃～35℃, storage temperature: -20℃～+45℃

Battery type: lithium battery

Dimensions Headphones: H*D*W: 30.5mm*24.3mm*21.6mm (including default M earmuffs); Charging case: H*W*TH: 46mm*64.3mm*23.2mm Remarks:

Weight Headphones: about 5.1g (without earmuffs); charging case: about 42.6g (without headphones)