♛✜ Water Inlet Valve AC220V 12V 24VDC NO NC Plastic Solenoid Valve 1/4 quot; 3/8 quot;OD TubeHose Connection forRO Reverse Osmosis PureSystem
ข้อมูลสินค้า
ราคา
703.00 359.00 บาท
แบรนด์
No Brand
ร้านค้า
- Actuator Mode：Without Manual And Instruction
- Power Source：DC
- Media：Water
- Standard or Nonstandard：Standard
- Power：Solenoid
- Pressure：Low Pressure
- Material：Plastic
- Structure：ANGLE
- Origin：Mainland China
- Certification：CE
- Port Size：1/4- 3/8-
- Model Number：1/4- 3/8-
- Temperature of Media：0-100 ℃
- Operating voltage：24v dc
- Package Weight：0.12kg (0.26lb.)
- -
1/4- 3/8-OD Tube Solenoid valve.
Turn on water when system start;and cut off water when system stop.
Working pressure:0.02-0.8Mpa.
Rated power: 4.8W.
- Packaging include
- Solenoid Valve x 1
Action method
Pilot
Type
Normally closed (electricity and water connection more commonly used)- Normally open (power on and water off less use)
Medium temperature
0-100℃
Voltage variation range
-10---10-
Work pressure
Pressure type 0.02-0.8Map- No pressure type 0-0.01Map
Service life
≥500000 times laboratory data environment temperature 30℃ power on for - 10 seconds every 10 seconds
Ambient temperature
0-50℃
Angle of coil and valve body
90 180 270 360
Interface specifications
DN10 3/8 16.2mm
Check function
NO
Filter function
Conventional without filtering
main material
Coil copper bracket iron coil frame PBT iron core DT3 spring stainless steel- diaphragm silicon rubber valve body POM
medium
Suitable for pure water box tap water not suitable for acid-base thick viscous liquids and all other non-liquid
Rated electric load
AC220V 0.045A DC6V 0.88A DC12V 0.55A DC24V 0.23A(Different styles will have a little difference
Insulation resistance
DC500V megohmmeter lasts resistance should be greater than 100MQ after 1min- Insulation class E
Watertight performance
Water pressure 0.02Map leakage volume -0.1mL/min Water pressure 0.03-0.8Mpa leakage volume 0mL/min
Water resistance
Water pressure 1.2Mpa lasted 5min without cracks deformation or water leakage
reliability
0.01-0.02Mpa on and off for 10s for 1h normal on and off (if check valve is provided the check valve is not connected directly without jamming)
Flow characteristics
The pressure is 0.02Mpa the flow is 2L/min the pressure is 0.3Mpa the flow is 8L/min the pressure is 0.8Mpa and the flow is 20L/min.- The pressureless type is related to the actual water pressure so the flow cannot be measured temporarily
Layer insulation
High voltage pulse it should be normal after 2S
Continuous power
Continuously energize for 24 hours no deformation no burn out of the coil and the measured coil temperature does not exceed 90℃
Withstand voltage
Conductive part and non-conductive part can withstand AC1500V 50HZ withstand voltage
Power connection
6.3 Standard plug/terminal type
-
