With feature: Sensor cable could be extended to 50 meters. 0-99%RH control. Super high accuracy. Modbus RS485. Additional outputs: two timers for outputs.
With function: Heating / Cooling mode option. Humidifying / de-humidifying mode option.
Temperature and humidity output delay protection. Hight / low temperature / humidity alarm.
Sensor failure alarm and outputs protection.
Calibration for temperature and humidity. Output R1: Could be energized when over hot and/or over wet. Could drive an air exhausting fan, or an alarming indicator.

Two timers:
One timer output is R1, could drive an air exhausting fan periodically.
Another timer outputs R4 and R5 could drive such as incubator egg tray.
R4 and R5 could be energized by keys, suitable for control the egg tray to any angle.
Running status saving for power supply
It is suitable for: Incubator control Swallow, swiftlet humidity control Mushroom house control and so on.
Power supply: 100 ~ 240Vac, 50/60Hz
Accuracy: Temperature: 1% / 25℃
Humidity: ±3% (with the sensor ZL-SHr05J), ±2% (with the sensor ZL-SHr05P)
Setting range: Temperature: 0.0 ~ 65.0℃
Humidity: 0 ~ 80%RH (when U9 = 0 for ZL-SHr05J), 0 ~ 99%RH (when U9 = 1 for ZL-SHr05P)
Display range: Temperature: -20. ~ 80.0℃, Humidity: 0 ~ 99%RH
Outputs:
Temperature control: R3 ≤ 5A
Humidity control: R2 ≤ 3A
Multi-function: R1 ≤ 3A
Timer outputs: R4 and R5 ≤ 1A
Working environment: -10 ~ 45℃, no more than 85%RH, without dew
Case dimension: W78 x H34.5 x D71 (mm)
Installation drilling: W71 x H29 (mm)
Protection level: IP65 (Front side only)
Colour: Black
material: plastic

Package Contents:
1 x Temperature Controller
1 x sensor

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little dif