1 Phase 2 Wire DIN Rail Electronic Energy KWh Meter Single Phase 4P Measurer Rail Table
1-phase-2-wire-din-rail-electronic-energy-kwh-meter-single-phase-4p-measurer-rail-table
ข้อมูลสินค้า
ราคา
414.00 276.00 บาท
รีวิว
3 ครั้ง
แบรนด์
OEM
ร้านค้า
  • It has the advantages of convenient meter reading, high reliability, small volume, light weight, beautiful appearance, advanced technology
  • Installation of 35mm DIN standard guide rail
  • This meter is suitable for the measure the single-phase AC efficient electrical energy of rated frequency 50Hz ,used for fixed installation indoors
  • Apply to the environment temperature is less than- 25 ℃ ~ + 55 ℃, relative humidity is not more than 95%, and in the air without corrosive gases and avoid dust, mold, salt fog, condensation, insects, etc
  • It has good anti‑electromagnetic interference, low power consumption, high precision, high overload, high stability, anti ‑ theft and long life
1. It has the advantages of convenient meter reading, high reliability, small volume, light weight, beautiful appearance, advanced technology
2. Installation of 35mm DIN standard guide rail
3. This meter is suitable for the measure the single-phase AC efficient electrical energy of rated frequency 50Hz ,used for fixed installation indoors
4. Apply to the environment temperature is less than- 25 ℃ ~ + 55 ℃, relative humidity is not more than 95%, and in the air without corrosive gases and avoid dust, mold, salt fog, condensation, insects, etc
5. It has good anti‑electromagnetic interference, low power consumption, high precision, high overload, high stability, anti ‑ theft and long life

Specification:
Descriptions:
The meter is full compliance with national standards GB/T17215.321-2008 and IEC62053 international standard of grade 1 level of the relevant technical requirements of the single phase KWh meter,can measure the active power energy , by 6 digital display total electricity consumption,It has the advantages of convenient meter reading, high reliability, small volume, light weight, beautiful appearance, advanced technology, and installation of 35mmDIN standard guide rail.It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti - theft and long life.
Features:
It has the advantages of convenient meter reading, high reliability, small volume, light weight, beautiful appearance, advanced technology.
Installation of 35mm DIN standard guide rail.
This meter is suitable for the measure the single-phase AC efficient electrical energy of rated frequency 50Hz,used for fixed installation indoors.
Apply to the environment temperature is less than - 25 ℃ ~ + 55 ℃, relative humidity is not more than 95%, and in the air without corrosive gases and avoid dust, mold, salt fog, condensation, insects, etc.
It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability, anti - theft and long life.
Specifications:
Standard: IEC62053-21
Display:6-digit
Color: White
Voltage: 220V
Current: 10(40A)
Frequency: 50Hz
Impulse constant: 1600imp/kWh
Operating Humidity: ≤95%
Operating Temperature: -25 ℃ ~ + 55 ℃
Size:10 x 7.5 x 6.5cm/3.93 x 2.95 x 2.55inch
Weight: 276g
Installation and use:
1. Installation of energy meter required experienced electrician or professional, and determined to read the manual.
2. energy meter should be installed in the indoor ventilated and dry place, adopt 35mmDIN standard guide type installation, the bottom plate of the electricity meter should be fixed in the wall that is strong refractory, and not easy to vibrate.
3. Electricity meters should be installed in protective cabinets in places where there are filth and potential damages.
4. Install according to the wiring diagram ,it is best to use a multi-strand copper wire to avoid the failure of the electrical energy meter working or burning down.
5. When the electricity meter is correctly connected to the power grid, the power indicator of the meter is light.
6. Electric energy meter should take the lightning protection measures when it is used in the area with more lightning, so as to avoid damaging the electric energy meter by lightning.
7. The load of the energy meter is in the range of 0.05Ib ~ Imax (direct access) or 0.02Ib ~ Imax (through the access type of the transformer),More than the transformer ratio,is the actual power consumption
8. Data display: the meter display
9. Power indication: the green light indicates that the power meter has normal working power
10. Pulse indication: when a red light indicates that the power pulse is detected
11. When there is a sampling signal, the pulse light is about 80ms
Package Included:
1 x Energy Meter
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. 



If you like our store, Please add our store to your Favorite Stores, You can get our New arrival and Discount information in time.

Your satisfaction and positive feedback is very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and services. If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback.

คำที่เกี่ยวข้อง
pvc 1 1/2airpods 2 1:1airpod 2 1:1วาล์ว 1 1/2ยูเนี่ยน 1 1/2ประตูน้ำ 1 1/2หางไหล 1 1/2ยางใน 12 1/2 * 2 1/4ข้อต่อ 1 1/2มิเตอร์น้ำ 1 1/2

สินค้าใกล้เคียง