DC24V or AC220V power supply provides isolated power distribution for the sites transmitter, and the current signal generated by the transmitter is transmitted from the field to the control room, PLC, DCS, etc.
Input interface current source, two-wire, three-wire transmitter universal; internal use of efficient magnetic isolation technology, input, output, power supply isolation between each other, with high precision, high linearity, low temperature drift and so on.
Distribution voltage: 24V (Maximum drive current 30mA)
Input impedance: ≤50Ω
Output load resistance: Current type: RL ≤ 500Ω; Voltage type: RL≥10KΩ
Power supply: DC 24V,±10%;AC 85~265V
Accuracy: 0.2%F.S
Temperature drift: 0.2% F.S./°C
Response time: ≤10mS (0-90%)(TYP)
Insulation strength: 1500VAC/1min (Input, Output, Power supply)
Insulation resistance: ≥100MΩ(Input, Output, Power supply)
Working temperature: -20~+55°C
Electromagnetic Compatibility: GB/T18268 (IEC61326-1)
Field equipment: Two-wire/Three-wire transmitter; current source
DIY Supplies: ELECTRICAL
Display Type: Analog Only
Type:A / B / C
color:As shown
Material:plastic

Package Contents:
1 x Signal Isolation Transmitter(24V DC 4-20mA to 4-20mA 1 input 4 output)
/
1 x Signal Isolation Transmitter(24V 4-20mA to 0-10V 1 input 4 output)
/
1 x Signal Isolation Transmitter(24V DC 0-10V to 0-10V 1 input 1 output)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.