#DC 3.6V-6V 20KV 20000V Boost Power Module Hochspannungs-Generator Vorsta
Features:
Dual high-voltage cables can be lit by paper, and one high-voltage cable can be supported in Metallkoerper current and without sound.
This module can be used as high school science experiment equipment, electronic equipment, negative ion generator, and high voltage source for doing science hours.
About performance:
Single 18650 or idle mobile phone battery (remove the protective plate, the position is more than 2000mAh, and the capacity is planned).
Notice:
1. The high-voltage module should avoid using no-load high-voltage current. The power must be set at the appropriate distance from the high voltage output line to the Batteriekapazitaet proportional to the distance and to utilize the high voltage arc (the voltage is not supplied as high as possible to have power).
2. Experimental test from short to long arc distance. Without the maximum arc distance used by the stride power, the energy cannot be released and the module can be easily damaged due to the high voltage.
3. Due to the power, the internal heat is not easy, each working time should be set within 5 seconds.
Specification:
Material: Metal, Plastic
Color: black
Dimensions: 19×20×18mm (LxWxH)
Weight: 19 grams
Input voltage: DC3.6V-6V
Input current: 1.5A
Output voltage: (please pay attention to safety when using) DC20KV
Output current: 0.05A
Input line length: about 1.1mm (red is positive)
Ausgangsleitungslaenge: about 110 mm
High voltage bipolar discharge distance: 5mm
High Art: Impulse Current
Structure: high integration, low voltage
Package Included:
1 x 20kV Boost Boost Power Module
50KV ultra-high voltage pulse generator super arc pulse ignition coil module
product description:
1. Model: MC-105
2.Length: 64mm
3.Diameter: 24mm
Plane diameter: 21mm
5. Input voltage: DC 3.7-6V
Input current: 2A-3A
Input wire length: 10cm
8. High voltage form: pulse DC type
9. Output voltage: 50kV
Output current: 0.05A
11. Output line length: 8cm
12. High voltage polarization discharge distance: 1-2cm
13. How to use: The red and green lines are input ports, the red line is positive, the green line is negative, and the other two high-voltage lines are output ports; fix the appropriate distance between the high-voltage line ports; the input port is connected to the battery to achieve high-level voltage arc
14. Input power supply: you can use a single 3.7V lithium battery or 2S in parallel, such as 18650 battery, etc.
Package Included:
1 x 50kV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module
DC 3V-6V to 400kV Boost 400000V Boost Power Module High Voltage Generator
describe:
Input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High Voltage Type: Type of Pulse Current
Output voltage: 400000 V (please pay attention to safety)
The distance between high voltage discharges is 10mm - 20mm
Output high voltage wire length: 100mm
Input power cord length: 100mm (red wire is positive)
wiring:
Red and green power connections red wire: "+" green wire "-"
Output: the other side, the same color line
caution:
High-voltage modules should avoid using high-voltage no-load power. (The power supply must be adjusted to an appropriate distance from the high-voltage output line, the battery capacity is proportional to the distance and the use of high-voltage arcs (without applying the voltage as high as possible, it must provide sufficient current). Experiment from short to long arc distance tests, do not exceed the maximum Arc distance power, energy, can not be released due to high voltage, it is easy to damage the module).
Work: Intermittent, continuous work is not allowed for more than 1 minute and short circuit is not allowed on the output side. Incorrect voltage and long working time can easily damage the module
Package Included:
1 DC 3V-6V to 400kV Boost 400000V Boost Power Module High Voltage Generator
500KV generator
describe:
The peripheral circuit is simple (just insert the switch and the battery), and the discharge intensity is severe.
Physical volume: length 70mm * diameter 32mm
Input voltage: DC6V-12V
Input current: 0.5A-1A
Input line length: 23CM
High voltage type: DC pulse type
Output voltage: about 500KV (pay attention to safety when using)
Output current: 0.5A-1A
Output line length: about 92CM
High-voltage bipolar discharge distance: 2CM-3CM [need to be from short to long, the specific length is too long, and it is impossible to discharge high-voltage electricity, which will easily cause the inside of the high-voltage package to burn out due to severe heat]
Features:
This module is a finished module of a scientific small production high voltage inverter transformer/booster
The input terminal DC6V-12V voltage can get tens of thousands of volts of DC high voltage at the output terminal. It can be used in high school science experiments, electronic equipment, negative ion generators, high voltage power supplies, etc. for small scientific productions. The module is made by Tesla coil principle.
Output high voltage pulse current, small size and high efficiency
Precautions for use:
1. In order to avoid using electricity under high voltage and no load, the discharge end must be adjusted to an appropriate distance.
2. During the test, the arc distance should be tested from short to long, and overpower is strictly prohibited; if the arc distance is too large, the energy cannot be released because the high voltage cannot be generated, and the module is easily damaged.
3. The internal heating of the high-voltage module is serious, so it cannot work for a long time. A discharge is recommended to be controlled within 10 seconds.
4. Determine whether the battery capacity can drive the maximum power output of the battery
The voltage measurement method is arcing time. If it is around 6V, it can output maximum power.
5. The two small-capacity lithium series are 7.2V, and the voltage measured in the arc state has dropped to about 4V. The smaller the capacity, the shorter the arc. It is recommended to use a lithium battery with a capacity of more than 2000 mAh, and the best conditions for a battery capacity of more than 4000 mAh.
1000KV high voltage generator
Product Specifications:
Module Type: MC-901
Input voltage: 3.7V-7.4V
Input current: 0.5A-1A
Input lead length: 9 cm
High voltage type: pulse DC type
Output voltage: 800KV-1000KV (please pay attention to safety when using)
Output current: 0.5A-1A
Output length: about 16 cm
High voltage bipolar discharge distance: 1.5cm-2cm
The power of the module is large, and it is not suitable for heat dissipation inside, so it cannot work for a long time. Be sure to control the power-on working time within (5) seconds, and use intermittent discharge. Exceeded fragile! Sorry no way!
Ordinary dry batteries have been tested and have no capacity to drive the module to work. It is recommended to use 18650 lithium batteries.
Dimensions: 88x26mm (LXD)
Module usage instructions:
1. The high-voltage module should avoid using high-voltage no-load. It must be powered on before the high-voltage line is adjusted to the correct distance. The pulling distance of the high-voltage line is proportional to the voltage and capacity of the battery.
2. When the test arc distance is from short to long, it is forbidden for the power supply to exceed the longest arc distance. Since the high-voltage energy cannot be released, it is very easy to damage the module.
3. The power supply of the module, the internal heat is not hot, so the working time is not long.
DC 12V 15000V to 20000V 20KV Adjustable High-Voltage Electrostatic Generator Igniter Boost Step up Module Negative Ion Ignition
Input voltage: DC 12V
Output voltage: 15000V-20000V adjustable
Rated power: 5W
Mounting hole diameter: 5mm
Hole center distance: 112mm
Size: 60*70*30mm
Note: Small red and black line is input, red is 12V power supply positive input, black is negative input, thick red line is high voltage positive output, thick black line is high voltage negative output.
Package Included:
1PCS x DC 12V to 20000V High-Voltage Electrostatic Generator Negative Ion Generator
