1PC 908D 80W Electric Soldering Iron Heater Ceramic Internal heating element
1pc-908d-80w-electric-soldering-iron-heater-ceramic-internal-heating-element
ข้อมูลสินค้า
ราคา
410.00 205.00 บาท
แบรนด์
No Brand
ร้านค้า
  • Dimensions:Lenght 70mm Diamter 3.8mm
  • Output Power:60W 80W
  • Temperature Stability:Adjustable
  • Output Temperature:200-450
  • Input Voltagle:AC 220V
  • Model Number:6038-220
  • Brand Name:HUXUAN
  • Origin:Mainland China
  • Certification:NONE
  • -
  • Preparation
  • 1. Always keep the tip of the bit clean ensure to coat the bit liberally with solder the first time the iron is switched on. Note: Initial tinning is done in order to extend the life of the bit.
  • 2. Wet the provided sponge prior to using.
  • 3. Check that the solder wire is ready for use and adequately extended from the case as shown in step 1 in the above illustration below.
  • 4. Ensure that the bit fits snugly and has adequate contact with the internal element.
  • How to solder:
  • How to change/replace bits:
  • Using the soldering iron
  • 1. After turning the iron on the bit will commence heating and will be ready for use when the solder wire begins to melt at contact.
  • 2. Initiate soldering by ensuring the melted solder makes a clean connection between the contacts that you attempting to solder.
  • 3. Move the solder wire and iron away once enough solder is placed and wipe any residual solder using the wet sponge.
  • 4. Always remember to switch the iron off at the mains and place it in the provided holder while it cools enough to be stored safely.
  • Notes:
  • 1. Use safety goggles and take necessary precautions to avoid injury or fire.
  • 2. The iron heats up quickly. Select a suitable temperature to operate at. Using the iron for long hours and at high temp may shorten the life of the product.
  • 3. Make sure to only switch the iron on when required and switch it off when not in order to reduce the risk of injury and fire.
  • 4. Clean the soldering tip ever so often to extend its life. Avoid using abrasive chemicals and surfaces as this could damage the metallic surface.
  • 5. The provided bits are 900M series and spares are available from where you purchased this product.




  • -

https://th-live-01.slatic.net/p/b4e0ff8adbe8aed275ed3e91360cb902.jpghttps://th-live-01.slatic.net/p/f3c1a2ae657f45adee1ae19475b92407.jpg

คำที่เกี่ยวข้อง
heating elementheatingself heatingheating padheating mantleheating bagheating coilheating plateheating rodats heating

สินค้าใกล้เคียง