Notes need to be careful.
1. Do not connect AC110V, AC230V or any voltage greater than 12V to our lamp.
2. Do not keep the light on for more than 10 minutes without water, otherwise it will be more prone to burns.
3. When attaching the light to the niche, do not over-tighten the niche screw.
more flexible application
LED is small in size and simple in working method. LED can be flexibly used in various fields. It has been extended to fields that traditional light sources cannot. For example, LEDs can be made into surface light sources, line lights, etc., traditional light sources are affected by volume and installation methods. , The influence of power supply mode is difficult to achieve.
Voltage fluctuations have no effect
LED external drive power, can work in a wide voltage range of 90 ~ 260Vac, voltage fluctuations have no effect on luminous flux and life. The operating voltage range of traditional light sources is very narrow, and only 20% of the voltage fluctuation range is allowed. The voltage fluctuation directly affects the luminous flux and life. If it is too low, it will cause failure to start, and if it is too high, the light source will burn out.
There are 16 changing modes, which are controlled by wireless radio frequency remote control. Equipped with power-off memory function, it can remember the last light-off mode, and it can also switch the power-off mode on and off 4 times in a row to switch the control.
