✻☏● 2PCS Universal 9 LED Car Side Mirror Turn Signal Light Strip Soft Flashing Amber DRL Indicator Lamp for Car SUV Truck Trailer
ข้อมูลสินค้า
ราคา
1,306.00 731.00 บาท
แบรนด์
No Brand
ร้านค้า
- Size:31MM
- For Vehicle Brands/Model:Universal
- Voltage:12V
- Interface Type:None
- Lumens:30Lm
- Item Weight:180g
- Model Name:LED Car Side Mirror Turn Signal Light
- Wattage:3W
- Item Type:Turn Signal
- Origin:Mainland China
- To Fit:Turn Signal Light
- Turn Signal Light:Gel silicon/LED chip
- Number of LED:9 each 18 in total
- Light Color:Amber
- Lifetime:50000 Working hour
- 2PCS Universal 9 LED Car Side Mirror Turn Signal Light Strip Soft Flashing Amber DRL Indicator Lamp for Car SUV Truck Trailer
- Product Feature:
- ✅ High-Quality Design: Made of Gel silicon/LED chip designed with short circuit protection for safe driving and unbreakable and rust-resistant silicone tube enable this led strip light can withstand harsh climatic conditions and works well in rainy or foggy days.
- ✅ Easy Installed: Each strip is backed with stick tapewith the Pre-installed Adhesive Tape on backside of the strips you can mount it anywhere.Also it can easily be bent or curved to desired position. No damage to your car.
- ✅ Waterproof Design: With the IP65 Waterproof Silicone built it will prevent from any sand water dirt snow or dust.
- ✅ Universally Fit: For Any DC12V auto ( Car vehicle SUV Vans Truck RV Trailer etc.).
- Product Specification:
- Type:Car Side Mirror Turn Signal Light
- To Fit:Turn Signal Light
- Bulb Type:Gel silicon/LED chip
- Number of LED:9 each 18 in total
- Light Color:Amber/Blue
- Voltage:DC 12V
- Wattage 3W
- Size:16.5CM x 2.5CM
- Cable Length:200CM
- Waterproof Rate:IP65
- Working temperature:-40°C-60°C
- Lifetime:50000 Working hour
- Fit Type:Universal Fit
- Fit For:For Any DC 12V auto ( Car vehicle SUV Vans Truck RV Trailer etc.)
- Attention:Before applying this product clean the surface of the rearview mirror
- How To Use:
- Method (a): Must remove the mirror
- 1. First bend the product to the same radian as the mirror.
- 2. Stick the lamp firmly on the mirror frame.
- 3. Remove the tripod from the car. Loosen the screw and remove the mirror.
- 4. Run the wire through the round hole in the tripod into the car.
- 5. Use double-sided adhesive tape to secure the wire under the mirror so that it is not easy to see the wire.
- 6. Connect the wire to the width lamp in the engine room.
- 7. Done.
- Method (b): No need to remove the mirror
- 1. First bend the product to the same radian as the mirror.
- 2. Stick the lamp firmly on the mirror frame.
- 3. Double-sided tape is used to fix the wire under the mirror so that the wire is not easily seen.
- 4. The wire runs along with the mirror to the crack in the door.
- 5. Connect the wire to the width lamp in the engine room.
- 6. Done. Lights could still be seen from behind.
- Package Included:
- 2x Car rearview side mirror turn signal LED lights