CS2mm EPDM O RING ID 30/31/32/33/34/35/36/37/38/39x2 mm 50PCS O-Ring Gasket Seal Exhaust Mount Rubber Insulator Grommet ORING
ข้อมูลสินค้า
ราคา
1,341.00 670.00 บาท
แบรนด์
No Brand
ร้านค้า
- Standard or Nonstandard：Standard
- Shape：Ring Gasket
- Model Number：Thickness 2x30/31/32/33/34/35/36/37/38/39/40 mm
- Material：RubberEthylene-Propylene-Diene Monomer
- Brand Name：NoEnName-Null
- Certification：RoHS
- Origin：Mainland China
- O-ring Sealing Principles
- O-rings are bi-directional seals circular in shape and cross section. O-rings are generally
- made of an elastomeric material but may be made of other materials such as PTFE or
- metal. An O-ring seals through the deformation of the seal material by installation and media pressure to close off the gap between mating components. Higher system pressures can cause deformation through the gap known as extrusion resulting in seal failure. Choosing a harder seal material or installing back-up rings to support the O-ring may alleviate this problem.
- Method of operation
- O-Rings are double-acting sealingelements. The inital squeezewhich acts in aradialora xial direction depending on the installation gives the O-Ring its initial sealing capability.These forces are superimposed by the system pressure to create the total sealing force which increases as the systeme pressure increases (Figure 2).
- Under pressure the O-Ring behaves in asimilar way to a fluid with high surface tension. The pressure is transmitted uniformly to all directions.
- EPDM (Ethylene-Propylene-Diene Monomer O-Ring):
- EPDM O-ring in auto parts hygiene supplies medical equipment marine equipment petroleum equipment telecommunications equipment instrumentation machinery and other industrial fields are widely used.
- Use temperature range: -50 to 150 °C
- Application
- The O-Ring is used predominantly for static sealing applications:
- - As aradial static seal e.g. for bushings covers pipes cylinders
- - As an axial static seal e.g. for flanges plates caps.
- O-Rings in dynamic applications are recommended only for moderate service conditions.They are limited by the speed and the pressure against which they are to seal:
- - Forlow duty sealing of reciprocatingpistons rods plungers etc.
- - For sealing of slowlypivotingr otating or spiral movements on shafts spindlesrotary transmission leadthroughs etc.
