Note: Please read before buying

Features:
◆The socket can be manually operated or via the Remote Control.
◆The night light can only be controlled by the transmitter.
◆The socket receiver will still remain in the “OFF” mode after power out, even when the power comes on again.
◆ The transmitter and the socket receiver can be freely combined ( transmitter or socket receiver must from our company), only need to program according to the manual.

"1 socket only" represents only a socket (excluding remote control); "1 remoter only" represents only a remote control (excluding socket).

socket receiver
Input Voltage: 230V AC,50/60Hz
Max.load current: 16A
Transmission frequency: 433MHz

transmitter
Power for transmitter:1 section DC12V 23A battery
(Product does not include battery)

This product can be used in conjunction with BroadLink RM 4pro, and it can be remoy controlled by mobile phones after the link.

clear code, pair code, link with RM4 pro to realize mobile phone control. If you want to buy in combination with Broadlink RM4 pro, please click on the picture below:

Real shot pictures

Note:

All remote controlled sockets have been pre-programmed and can be used immediay.
To re-program the remote control transmitter and socket receiver, please follow instructions below.
Detailed Self- Learning Operation:

Re-programming

■Plug the remote controlled socket to a power point and turn the power on.
■Press and hold the power button of the socket receiver for about 3 seconds till the LED indicator on.
■Release the power button.
■Click the left button of the transmitter.Socket programming successful when the LED indicator flashes until it stays on.
■Continue click the right button of the transmitter.Night light programming successful when the LED indicator flashes until it stays on.
（Note: The programming interval of the left and right buttons must be less than 8 seconds, otherwise the night light fail to be programmed.）
■ The remote controlled socket is now ready to use.

Clear programming

■Plug the remote controlled socket to a power point and turn the power on.
■Press and hold the power button of the socket receiver for about 8 seconds until the LED indicator flashes to go off.
■Release the power button.The clear programming is successful.

Note:
Battery is not included for avoiding shipping troubles.
Make sure the battery and socket installation is firm, safe and correct.
For indoor use only, it should be installed in the places of aeration and far from high-temperature source.
Make sure to avoid strong sunlight, raining and moisture places
Do not exceed the maximum load current.