Features:

1. Recording can be repeated quickly, and the recording time is 30 seconds;

2. A variety of triggering methods for button/light sensor/greeting card pull switch are available;

3. Applicable to diy self-made greeting cards, gift boxes, invitations, jewelry boxes, handmade by students, etc.;

Size: 10*7cm3.93x2.7in

Instructions:

1. How to record

a. Pull out the transparent bar to the left, and it is in the power-on state at this time.

b. Press and hold the switch for a long time until you hear a "beep" sound, and start recording at this time. Only when the recording is over can the key be released.

c. After the recording is over, plug the transparent strip back to the right and disconnect the power.

2. How to listen

a. Pull out the transparent bar to the left, and it is in the power-on state at this time.

b. Click and press the switch key to hear the recorded content.

c. After listening, put the transparent bar back to the right and disconnect the power.

Special attention: Pull the transparent bar to the left to be in the power-on state. Remember to put the transparent bar back after use, otherwise it will waste power and shorten the battery life.

list:

1*tape recording card