7V12V24V Potentiometer speed control brushless drive ESC High speed type Drive brushless air pump water pump fan

ข้อมูลสินค้า

ราคา

1,145.00 595.00 บาท

แบรนด์

No Brand

ร้านค้า

7dt

Variants1

Brand Name：YIXINYOU
Motor Type：DC Motor
Model Number：Potentiometer speed control brushless drive ESC
Potentiometer speed control 7-24V high speed brushless ESC drive maximum current 20A support 0-5V analog voltage speed regulation suitable for three-phase brushless motor air pump water pump fan etc. that need external drive. The owner of the shop tested several brushless motor fans can run normally compatibility is good if you do not know first contact the owner to confirm if you use high-power use must pay attention to heat dissipation it is best to force air cooling or add heat sink.
Interface Description:
1. U V W phase line output motor
2.VCC GND main power supply (external DC power supply)
Product parameters:
Product Name: Single button (potentiometer) three-phase DC brushless Hallless drive
Model: X30B (single button) X30A (potentiometer)
Working voltage: 6.5-24V
Drive current: rated 12A plus fan cold 20A
Maximum speed: 224000 RPM (2-pole motor) 74000 RPM (6-pole motor) 40000 RPM (12-pole motor) 35000RPM (14-pole motor).
Product size: length 45MMx width 26MMx height 12MM (without wire and protruding capacitor)
Weight: X30A 29g X30B 27g or so
Features: ESC is specially designed for all kinds of industrial control electric tools such as air pump water pump oil pump and fan which use DC three-phase brushless motor. The default medium angle and long time high current work Jianyi plus fan cold has overheat protection When the external heat dissipation condition of the ESC is poor the temperature is automatically reduced when the temperature exceeds 100 degrees and the temperature drops to 100 degrees to return to normal.
Precautions:
1. The power supply circuit on the main board has no fuse and the built-in self-addition will cause the chip on the board to be permanently damaged (even if it is 1 second).
2. There is motor stall protection during normal operation. Since the module power and current are very large please do not artificially short circuit when the module is not working normally. Once the short circuit has the possibility of burning the line please use the first wiring test machine. Current low voltage test after ok then work with high current and high voltage.
3. Do not connect the motor that is obviously inconsistent with the voltage and current of the drive module or the far difference to avoid the inconsistency of -no sense-.

สมาชิก

กรองการค้นหา

สินค้าใกล้เคียง