S800 Case Instruction:
ATTENTION:Since the assembly process involves voltage that exceeds the human bodys safety, non-professionals should not operate, you must do insulation and protective measures during the assembly process, and check the wiring several times for safety, please place the product at a placethatchildren and old people cannot get.
Please use the switch power supply we recommend, and if you use other power source, check if the positions of fixing holes are suitable or not.

Assembly step
Note:The case material is a bit soft and may be slightly deformed during transportation. If there is a space during the assembly, please straighten it before assemble it.
Back board assembly: install the rocker switchandAC power socketon the lower board.
Connect cables to switch power supply: (dangerous,non-professionals should not operate)
Uselongbrown cable to connect therockerswitch and the live wire (L) of the switch power supply; then useshortbrown cable to connect therockerswitch and the live wire (L) of the AC power socket; Use the blue cable to connect the neutral wire (N) ofAC power socket and the neutral wire (N) of switch power supply; Use a yellow-green two-colorcableto connect the ground wire (E) ofAC power socket and the ground wire (〨) of switch power supply.Use two red cables to connect the IN+ of the green terminal and the positive electrodes (+V), and use two black cables to connect the (IN-) of the terminals and negative electrodes (COM). Install the temperature sensor extension board to the back panel.
Assemble the switch power supply:Installthe switch power supply on the lower board
colour: creamy-white
material: metal

Package Contents:
1 x Top cover
1 x lower cover
9 x Connect the wire
1 x Ship switch
1 x Product socket
4 x Anti-slip mats
11 x Swi