QIACHIP 433MHz Universal Wireless Remote Control 86 Wall Panel RF Transmitter Receiver 1 2 3 Button For Home Room Light Switch
ข้อมูลสินค้า
ราคา
760.00 388.00 บาท
แบรนด์
No Brand
ร้านค้า
- Brand Name：QIACHIP
- Use：Electric DoorLightingSwitchUniversal
- Wireless Communication：RF
- Support APP：No
- Channel：1
- Package：Yes
- Frequency：433 MHz
- Model Number：433MHZ Universal Remote Control For Gate Garage Door Opener
- Working Current：10 mA
- Distance：Up to 30 Meters
- Application Example 1：Mando a Distancia
- Application Example 2：Garage Doors Access Control System
- Application Example 3：Heating Systems Control
- Application Example 4：Electronic Gates Access Control System Electrical Appliances Control
- Application Example 5：Led Light Lamp Switch Home Security Alarm System
- Application Example 6：Car Sunroofs Control Mando Garaje
- Application Example 7：For 433Mhz RF Receiver 1527 EV1527 Learning Code Button
- Wall Panel Transmitter:
- Operating Frequency: 433MHz
- Battery Model: CR2032(Package Not includedbattery)
- Dimensions: 86mm x 86mm x 13mm
- Features:With Fluorescent Strips (Light in the Dark)
- Distance: indoor (20 meters) outdoor (80 meters)
- Technical Data Of Receiver:
- Input Power: AC 85V - 250V
- Standby Current: -5MA
- RF Frequency: 433MHZ
- RF working mode: Superheterodyne
- Receive sensitivity: -97dbm
- Transmitting distance: 20-50m( open space)
- Decoding mode: MCU software decoding
- Remote storage: 20pcs
- Support remote type: Learning code 1527Code
- Working mode: Momentary ToggleLatching
- Dimension of PCB: 53.8x31.2mm
- Notice:
- The package Included different products because you choose a Different options.
- Package List 1:
- 1Pcs x KR 2201-4 1 CH Receiver module( include Shell )
- Package List 2:
- 1Pcs x 433MHz 1 Gang Wall Panel Remote Control(No Include Battery)
- Package List 3:
- 1Pcs x 433MHz 2 Gang Wall Panel Remote Control(No Include Battery)
- Package List 4:
- 1Pcs x 433MHz 3 Gang Wall Panel Remote Control(No Include Battery)
- APPLICATION
- Operation Introduction:
- About Working Mode:
- Momentary: Press the remote button the relay connects release the remote button the relay disconnects.
- Toggle: Press once the remote button the relay connects press the remote button twice the relay disconnects.
- Latching: Press the remote button A the relay connects press the remote button B the relay disconnect.
- Clearing the Code:
- Press the Learning Button on the receivers for 8 times the codes will be cleaned.
- After cleaning the code all the remote control cannot work any more.
- Learning the Code:(Momentary)
- Press the learning key on the receiver once time it comes into momentary setting mode.
- Wait for a moment the LED will be off it comes into learning state.
- Push the remote button LED indicator on the receiver board will flash then come off.
- After 3 seconds the LED indicator will be on again learning successfully.
- Learning the Code: (Toggle)
- Press the learning key on the receiver twice time it comes into toggle setting mode.
- Wait for a moment the LED will be off it comes into learning state.
- Press the remote button LED indicator on the receiver board will flash then come off.
- After 3 seconds the LED indicator will be on again learning successfully.
- Learning the Code:( Latching)
- Note: When you choose for latching mode in order to learn more remote control you need to learn two different button the first time learning is for ON the second time learning for OFF.
- For example: Button A - ON Button B - OFF
- Press the learning key on the receiver triple time it comes into latching mode .
- Wait for a moment the LED indicator on the receiver board will flash then come off.
- Press the remote button A. LED flash for 5 times.
- Press the remote button B. LED flash for 5 times
- After 3 seconds the LED indicator will be on again learning successfully.
- A - ON B - OFF.
- Instructions:
- The first step :Clear the receivers memory
- Press the Learning Button on the receivers for 8 times the codes will be cleaned.
- After cleaning the code all the remote control can not work any more.
- Step Two :Match Wall Panel Remote Transmitter and Receiver
- Press the learning key on the receiver twice time it comes into toggle setting mode.
- Wait for a moment the LED will be on it comes into learning state.
- Press the remote button LED indicator on the receiver board will flash then come off.
- Learning successfully.
