-------------- PRODUCTS INFORMATION -------------- Material: Plastic Size: 12.7*11CM Voltage:: 100-240V Warm-up time: 2-3 minutes Applicable glue stick: 0.7CM Packing included: 1 PCS 10W-20W small glue gun. This product is an affordable and easy-to-use household appliance product. Instructions 1. Ensure the safety of the working environment and remove the sundries in the working area; 2. Make sure that the surface of the object you need to glue is clean, so as not to affect the bonding effect; 3. When using the hot melt glue gun, install the bracket with the nozzle downward and place it on a stable plane; 4. Insert the hot melt adhesive strip from the glue inlet to the gun chamber (use 7MM--medium 7.5MM adhesive strip); 5. Turn on the power and preheat for 3-5 minutes, or until the adhesive strip is compley melted 6. Just press the trigger lightly to let the glue flow out naturally. Excessive force may damage the hot melt glue gun; 7. After the work is completed, do not pull out the glue strip from the glue inlet. The hot melt glue will cause serious burns or damage to the hot melt glue gun. The next time you use it, plug in the power supply and preheat for 5-8 minutes before it can be used normally: 8. When youre done using the glue gun, let it cool before storing it -------------- INTRODUCTION -------------- 1. This product adopts high-tech ceramic PTC thermistor to automatically keep constant temperature. When the temperature rises to the design temperature of the glue gun, it will not rise again, which can prevent the glue gun from being damaged by the overheating of the heating element, save energy consumption, and extend the service life. purpose. 2. The electrical insulation strength of this product does not break down when 375V/min is applied. It can be used normally in AC or DC power between 110V and 240V. It is not limited by voltage fluctuations. It has a built-in safety fuse and is safer to use.❤❤❤ -------------- NOTE -------------- 1. Use voltage 110-220V, frequency 50-60HZ This product is a high-temperature glue gun. The glue strip of the corresponding specification should be selected according to the product series. If the user uses a glue strip of inconsistent size or type, it may cause the sol to reflow and damage the glue gun. It can be used directly after plugging in the power supply for 5-8 minutes. 2. All the goods send from China, please take into account about the shipping time when shopping. 3. For the items that ready in stock, we will send out within 1 work days, for the pre-order items, we will send out within 3 work days. 4. If there is any problems about the products you buy from our store, please contact us, we will try out best to solve the problem for you.