Bluelab METCOM Combo Meter for pH, Temperature, Conductivity (Nutrient) in Water with Easy Calibration, Digital TDS Tester for Hydroponic System and Indoor Plant Grow, Pack of 1
Product Description
Model: METCOM
BLUELAB COMBO METERThe Bluelab Combo Meter is a portable Meter that takes measurements of pH, conductivity and temperature within a solution. The correct pH, conductivity and temperature levels of a nutrient solution is critical for healthy successful growth. If you are experiencing problems with yellow leaves, or slow stunted growth, the Bluelab Combo Meter will soon tell you if each parameter is within the plants requirements. Adjustments can be quickly made to get your crop back on track.FEATURES * Measures pH, conductivity(EC, CF, ppm 500 and ppm 700)and temperature(C,F) * Lightweight and portable * Large easy to read display * Simple push button pH calibration * Successful pH calibration indicator * No calibration required for conductivity and temperature * Replaceable double junction pH probe included * Over range and under range indicators * Low battery indicator * 2 x AAA alkaline batteries included * Auto off function The Cadillac of Meters ITS ALL YOU NEED FOR SIMPLE AND RELIABLE CROP MANAGEMENTThe Bluelab Combo Meter has two probes, a Bluelab pH Probe and a Bluelab Conductivity / Temperature Probe. The Conductivity / Temperature probe is permanently fitted to the Meter, whereas the pH probe is replaceable. This is due to the fact that pH probes have a limited life and age through normal use. Replacement pH probes can be purchased separately.You can also connect a Bluelab Soil pH Probe to the Combo Meter to take direct pH soil measurements or measure the pH of a soil solution. The soil pH probe can also measure solutions. Bluelab Soil pH Probes can be purchased separately. Both probes require cleaning at least once a month and it is recommended to use the Bluelab pH and Conductivity Care kits. These care kits are made specifically for Bluelab instruments to increase probe life and ensure you are always receiving accurate readings.Large easy to read display THE SIMPLEST METER IN ITS CLASSWhen taking a reading, simply place both probes into the solution and the selected reading is displayed on screen. Both probes may be fully submerged into the solution. As the Bluelab Combo Meter is portable and does not require a power supply to operate, it can be used anywhere, anytime to help you manage your crops daily nutrient requirements.Calibration of the pH probe is simple and the instructions are supplied on the back of the meter. The push button calibration method makes this one of the simplest meters to use. Successful pH calibration indicators on the screen guide you through so you know the reading is reliable. After 30 days the calibration indicators will disappear, letting you know calibration is due. The Conductivity / Temperature probe does not require calibration as this is locked in during manufacture.
An all-in-one solution for testing pH, conductivity and temperature
A lightweight and robust handheld solution
Key features include:
Portable, doesnt require a power supply to operateSimple two-point pH calibration process for accuracyNo calibration required for conductivity and temperatureDouble-junction probe for superior accuracyCustomizable measurement scales for extra convenience
For utmost convenience, youll be able to customise your Bluelab Combo Meter with your preferred measurement scales. Not only will the Combo Meter measure pH, but you can also select from EC, CF, PPM 500 (TDS) and PPM 700 for conductivity or from C and F for temperature.
Get the fundamentals of growing right, every time
Replaceable double-junction pH probe included
A double-junction pH probe comes standard with the Bluelab Combo Meter. Unlike standard glass bulbs, the double-junction probe reduces build up on the probe for consistent readings and to increase lifespan.
New Zealand-made quality, built for growers
Our products are designed and built with growers, for growers - so you can relax knowing that your meter is robust and user-friendly, allowing you to get on with the tasks of everyday growing. The Bluelab Combo Meter was designed and built in New Zealand.
Tried and trusted by growers like you
Easy calibration for pH
Get rid of the headache of pH calibration with our simple two-point calibration process. Remember to calibrate your meters pH probe before first use. The pH probe comes with a 30-day calibration indicator that can be easily viewed on your meters screen. You do not need to calibrate for conductivity or temperature.
Fast and accurate readings
When taking a measurement, simply place your probe into the solution and the selected reading will be displayed on screen. As the Bluelab Combo Meter is portable and does not require a power supply to operate, you can get quick and accurate readings anytime and anywhere.
Superior design and manufacturing
All Bluelab products are proudly designed and manufactured in New Zealand. The design focuses on ergonomic qualities to assist with regular use in varying grow environments. Our rigorous production process includes each meter being inspected by hand before it finds its way to you!
The Bluelab promise
The Bluelab Combo Meter comes with reputable support. This means that you can have complete peace of mind when you invest in the Bluelab Combo Meter.
Bluelab: Trusted by growers like you for over 30 years
For over 30 years, Bluelab has been providing award-winning and innovative technology that helps growers unlock their plants full potential. At Bluelab, we believe that our commitment to designing hardy, purpose-built products and creating strong educational programs will help elevate the standard of growing. Together with our growers, we will create a world with fewer pesticides, food miles and less water usage. Let Bluelabs products take your growing to the next level.
Product Images
Product Information
ㆍ Brand : bluelab
ㆍ Model : METCOM
ㆍ Product Dimensions : 5.7 x 3 x 1.49 inches
ㆍ Item Weight : 5.3 ounces
ㆍ Manufacturer : Bluelab Corporation Limited - Import
ㆍ Country Of Origin : USA
ㆍ Item Model Number : METCOM
ㆍ Batteries : 2 AAA batteries required.
