[Texture] pure copper valve core, nylon valve cap, pure copper, strong strength and toughness.

[Size] V3-20-6 bend 27 ° long about 110mm

[Applicable]] truck, bus, cargo, bus; 8R22.5 tire, 9R22.5 tire, 10R22.5 tire, 11R22.5 tire, 12R22.5 tire, 315R22.5 tire.

[Product features] high and low temperature resistance, anti-aging, high sealing performance. High quality, high strength and corrosion resistance.

[Product features]] the function of tire valve is to serve as the interface of inflation and the valve of deflation, and keep the filled air from leaking; At the same time, it is also a device for checking tire pressure. The valve can be divided into two types: one is metal and the main body is brass; The other is rubber pad and the main body is rubber metal. The valve body is equipped with a valve core that works like a check valve. Compressed air can be filled into the inner tube without free air leakage. The valve cap can also be used as a wrench to screw in and out the valve core. There are bridge pads and compression nuts on the metal valve to improve the firmness of the combination with the inner tube. There are two types of valve shapes: Elbow and straight pipe. Elbow valve is only used on flat wheels. When the rear wheel is twin, use the elbow valve to inflate the inner tire without removing the outer tire.

[Installation method]]

1. Remove valve core and deflate.

2. Separate the tire toe and remove it from the tire rim.

3. Remove the valve.

4. Clean the holes on the rim and remove rust and dirt.

5. Install a new valve from the inside of the rim.

6. Install the tire correctly and inflate it to the rated air pressure.

7. Replace with a new valve cap.