Electrical Data | |
Voltage (V) | 85-265Vac/50Hz |
Power Factor (λ) | 0.5+ |
Starting Time (sec) | <0.5 |
Warm-up Time Up to 100% of the Full Light Output (sec) | Instant full light |
Product Data | |
Product Wattage (W) | 14W |
Colour Temperature (K) | 3000K,4000K,6000K |
Lamp Base | - |
Colour Render Index (Ra) | >80 |
Beam Angle (°) | - |
Energy Label | A+ |
Operating Temperature | -30°C to +40°C |
Switching Cycles (Times) | >2,000,000 |
Mercury Content (mg) | N/A |
Weight (g) | 850g |
Performance Data | |
Rated Life (hrs) | 15,000 Hours |
Lumen Maintenance at the End of Lamp Life (%) | >90% |
Product Dimensions | |
Length (mm) | 235mm |
Width (mm) | 235mm |
Height (mm) | 80mm |
COLOR TEMPERATURE
The colour temperature of a light source is taken from the temperature of a perfect black-body radiator that radiates light of a similar appearance to that of the light source. It is measured in units of absolute temperature; Kelvin (K). Interestingly, although red is associated with being a hot colour and blue a cold one, on the black body curve, blue occurs at higher temperatures than red. A more visual example of this apparent colour temperature contradiction can be seen in candlelight, which emits a warm red orange glow, but in fact has a low Kelvin temperature of 1850K. Therefore higher colour temperatures (5000K more) are called cool colours (bluish white); lower colour temperatures (2700 – 3000K) are called warm colours (yellowish white to red).
Colour Rendering Index (CRI)
The Colour Rendering Index (CRI or Ra) is a quantitative measure, which rates a light source’s ability to reproduce the colours of objects faithfully. In order to objectively compare the colour rendering properties of any light source, the CIE’s standardised measuring method operates on a scale from 0 to 100 (poor to excellent). The colour change of 14 standard colours is calculated when an object is exposed to a specific light source and then this is compared to a reference illuminant of the same colour temperature (a black body* is used for colour temperatures up to 5000K and daylight above that). The CRI for a pair of light sources can only be compared if they have the same colour temperature.
The CRI scale is chosen so that an ideal black body source, such as incandescent or halogen lamps, is by definition a CRI rating of 100. For light sources emitting a discrete spectrum, like LED and discharge lamps, the CRI can be anywhere between 0 - 100. As a rule of thumb, the more the spectrum is filled at all wavelengths (380 – 760nm), the better the colour rendering properties of the source, however a high CRI measurement intrinsically means lower efficacy (as less efficient wavelengths are also represented in the spectrum).
* A black body is a theoretical object that absorbs all incident electromagnetic radiation and due to its ability to absorb at all wavelengths, is the best possible emitter of thermal radiation. It radiates a continuous spectrum that depends on the bodys temperature.
