MITSUBISHI FX3U-ENET-L Product information and technical parameters：Brand: MITSUBISHIName: Module connected to EthernetModel: FX3U-ENET-LProtocol: SLMP, TCP/IP, UDP.Communication mode: full duplex / half duplex.At the same time can open a few: 4 connection.Weight: 0.3kg.Connect PLC FX3U/FX3UC to Ethernet.Support fixed buffer storage, communication connection MELSOFT, through the MC communication protocol, e-mail messages.When connected to the MELSOFT, through the Works2 PLC can achieve the remote maintenance of GX program.Connecting FX3UC, FX3GC requires FX2NC-CNV-IF or FX3UC-IPS-5V.
Max input / output points: 20 points.Power supply voltage: 24VDC.Input points: 12 points.Output points: 8 points.Output type: relay.Power consumption (W): 7.Weight (kg):0.3.Size (WxHxD) mm:75x90x49.Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI FX3U-ENET-L.This type of PLC is mainly used in all of the digital input, digital output control point of the deviceFX3U-ENET-LCan be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O MITSUBISHI FX3U-ENET-L.The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.All equipment is digital input and output point.The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator MITSUBISHI FX3U-ENET-L. Memory format: EEPROM.Number of steps: up to 16000 steps can be used.Battery support: do not.Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device.Note: built-in extension. Length: 3 meters.Specification: cable. Function: CPU module (internal service power supply).Input and output points: 64 points.Power supply capacity (DC5V power): 1100mA.Power supply capacity (DC24V service power supply): 600mA.Input / output mode: DC input (drain / source) / transistor (drain).Input points: 32 points.Output points: 32 pointts FX3U-ENET-L.The new expansion module is more convenient!Pioneer products with advanced built-in functions and rich extensibility.FX5U built-in analog, communication, high speed input and output,By extending the board and adapter can be easilyy extended system FX3U-ENET-L.In addition, through the high speed system bus,Can maximize the role of the built-in intelligent functions of the expansion device.
