Q&A
Qusetion 1:How to use it?
Step 1: Turn on the white button behind the solar panel, and then cover the solar panel (make sure the solar panel is in the dark)
Step 2: Turn on the remote control and check whether the solar light can be used normally
Question 2 : Why does the solar light can not work ?
Answer : Please check the following items.
1. The solar energy is exhausted and needs to be placed outdoors for charging;
2. Did not press the switch behind the solar panel
3. The solar panel is not covered, and the solar panel is exposed to light;
4. The remote control did not remove the insulating plastic sheet
Question 3 : Is the light flashing normal?
Answer:It is normal. This is to test whether the light can work normally, you need to use it with the remote control.
If the solar panel is in a half-bright and half-dark environment, it will flicker crazily, and you need to transfer it to a compley dark environment for it to work properly.
Note
Dear friend, this product is controlled by remote control, it does not support light/motion sensor temporarily, please pay attention before buying.
If you have any questions, please feel free to contact us.
Description
Lamp beads: 1* Highlight 5050
Solar panel:1.6W 5.5V polysilicon
Wire length: 3 meters
Led light color:warm white/white
Color temperature: 3500K(warm white )/6000K(white )
Battery:18650 lithium battery 3.7V 2200Mah
Charging time: about 6Hours
Lighting time: 4-8H charged(Automatic light off requires remote control to turn on)
Waterproof:IP65
Lampshade material:PC
Shell material:PC+ABS
Power: 30W
Output rate:1.5W
Notice:
1: Before turning on the solar light with the remote control, you must first press the white button behind the solar panel, otherwise it cannot be turned on.
2: The solar panel must be in a compley black state. It can identify whether it is night or day. You can use something to cover the solar panel for testing.