Motorized Projector Stand Bracket For Sony Panasonic ViewSonic Optoma projector holder Ceiling Projection Mount Accessories
Thickened all aluminum alloy projector hanger
Commercial/engineering/home use 99% projector
Load 25KG
Up and down escopic
Multi-angle adjustment
Line routing in the tube
Advantages of aluminum alloy:
Aluminum alloy material is light
Good carrying capacity
Many aerospace parts are made of aluminum alloy
Aluminum alloy has good strength and is not easy to rust
Aluminum alloy has good corrosion resistance,
More rounded and beautiful
Special hanger for high-end projector, thick and heavy bearing!
Suitable for JVC DLA-XC3800/5880/6880/6890/7800/7880 dedicated (tested and very suitable for JVC projector dedicated)
Sony VPL-HW30ES/HW40ES/HW55ES/HW68/VW328/VW500ES/VW528/VW1100ES
Epson TW6200/TW6600/TW7200/TW8200/TW8200W/TW9510C
Sharps Z30000A/Z48000A/ and other high-end hangers dedicated to high-end home projection. It is also suitable for some large engineering machines.
Projection bracket introduction:
Bracket weight: 1.73KG-3.35KG
Bracket color: black/silver
Suggested weight: less than 30KG
Bracket escopic: short pole 11CM-13CM/conventional pole 27CM-44CM extension/wall-mounted style/extended style
The diagonal length of the installation support angle: the shortest 26, the longest 46CM 360 degrees can be turned
Material: all aluminum titanium alloy (suitable for 99% projectors)
Installation steps:
1. Adopt all-aluminum alloy frame, effective load-bearing 25KG
2. Padded the black ring gasket
3. Align the hanging claws with the mounting holes
4. Choose suitable screws to fix the four hanging claws in turn
5. Adjust and fix the middle screw of the hanging claw
6. Fix the ceiling plate with the straight rod
7. Adjust the length of the straight rod according to the projection ring mirror and fix it
8. Connect the boom to the hanging plate
9. Fixing screws
10. Adjustable front, rear, left and right screws to adjust the projection position
11. Fix the screws after adjusting the position