Description:

Cylinder type sensing head sizeM18

TypeShielded

Sensing methodInductive type

Sensing distance7 mm -10% to +10%

Setting distance0 to 5.6 mm

Differential distance10% Max. of sensing distance

Sensing objectFerrous metal (Sensitivity lowers with non-ferrous metals.)

Standard sensing objectIron 18*18*1mm

Response frequency0.5 kHz (average)

Power supply voltage12 to 24 VDC (ripple(p-p) :10% Max.)

Operating voltage range10 to 30 VDC

Leakage current0.8 mA Max.

Control output (Output type)DC 2-wire models with polarity

Control output (Switching capacity)3 to 100 mA

Control output (Residual voltage)3 V Max. （under load current with cable length of 2m）

IndicatorOperation indicator(red), Operation setting indicator(green)

Operation modeNO

Protective circuitSurge suppressor

Output short-cut protection

Standard or Different frequencyStandard

Ambient temperatureOperating: -25 to 70 CEL

Storage: -40 to 85 CEL

(with no icing or condensation)

Ambient humidityOperating: 35 to 95 %RH

Storage: 35 to 95 %RH

(with no condensation)

Temperature influence+-10% Max. of sensing distance in temperature range of -25 to +70CEL

(As the basis for sensing distance of 23CEL)

Voltage influence+-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)

Insulation resistance50 M OHM Min. at 500VDC between charged parts and the case

Dielectric strength1000 VAC 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance1000m/s2 for 10 times each in X, Y, and Z directions

Degree of protectionIEC60529: IP67

Company standard: Oil-proof

Applicable standard (EC Directive (Low Voltage Directive))EN60947-1

EN60947-5-2

Applicable standard (EC Directive (EMC Directive))EMI: EN60947-5-2

Emission Enclosure: CISPR11 Group 1 class A

EMS: EN60947-5-2

Immunity ESD: IEC61000-4-2

Immunity RF-interference: IEC61000-4-3

Immunity Conducted Disturbance: IEC61000-4-6

Immunity Burst: IEC61000-4-4

CE marking: Equipped

Applicable standard (CCC mark)Not equipped

Connection methodPre-wired models (Cable length: 2 m)

Weight (Packed state)approx. 130 g

Material (case)Brass nickel plating

Material (sensing surface)PBT

Material (clamping nuts)Brass nickel plating

Material (toothed washer)Iron zinc plating

AccessoriesInstruction manual