Product Info

Voltage: AC220-240V OR AC100-130V
Power: 80W Frequency: 50Hz/60Hz
Temperature Range: 180~500℃/356~932℉
Temperature Stability: ±5℃
Heating Type: Wmore Ceramics Element
Soldering Iron Tips: 900M-B1.2
Wire Length: 1.4m / 55.12in
Soldering Iron Size: Approx.242*25*25mm/9.6*0.98*0.98in
Soldering Iron Weight: Approx.96g/3.4oz
Package Size: Approx. 254*55*35mm/10*2.2*1.4n
Package Weight: Approx. 139g / 4.9oz

SET-1

Package List :
1pcs Soldering Iron
5pcs iron tips ( I , B , K , 3C , 2.4D )
1pcs iron stand
1pcs Solder wire
1pcs Sucker ( Desoldering Pump )
1pcs Sponge
1pcs Tweezers ESD-15
1pcs Box

SET-2

Package List :
1pcs 80W Soldering Iron
5pcs iron tips ( I , B , K , 3C , 2.4D )
1pcs iron stand
1pcs Solder wire
1pcs iron heater
1pcs iron casing
1pcs Sucker ( Desoldering Pump )
1pcs Sponge
1pcs Tweezers ESD-15
1pcs Solder Wick CP-2015
1pcs Box

SET-3

Package List:
1pcs 80W Soldering Iron
5pcs iron tips ( I , B , K , 3C , 2.4D )
1pcs Stand
1pcs Solder wire
2pcs Screwdriver "-" and "+"
1pcs Sucker ( Desoldering Pump )
1pcs Sponge
2pcs Tweezers ( ESD-15 / ESD-14 )
1pcs Brush
1pcs Solder Wick ( CP-2015 )
1pcs Transparent Plastic Box

SET-4

Package List :
1pcs 80W Soldering Iron
5pcs iron tips ( I , B , K , 3C , 2.4D )
1pcs Stand
1pcs Solder wire
1pcs Graver
1pcs Sucker ( Desoldering Pump )
1pcs Sponge
2pcs Tweezers ( ESD-15 / ESD-14 )
1pcs Brush
1pcs Solder Wick ( CP-2015 )
1pcs 6-in-1 Solder Assist Tools
1pcs Black Canvas Bag

Product Point

Press the (+) button once to increase 1℃; press and hold it to increase
temperature continuously.
Press the (-) button once to reduce 1℃; press and hold it to reduce
temperature continuously.
The newly set temperature will be saved after 3 seconds,and will keep
the temperature for next time (℉) or (℃) symbol
flashes, it means the heating core has not reached the set temperature.

Product Point

Temperature Calibration:
, put the soldering tip on a thermometer,
and a moderate amount of solder on the soldering tip; make the test
point and the soldering tip have good touch.
(about 2 seconds),
write down the temperature.


;
press the (-) and (+) button at the same time to enter
temperature Calibration.
=set
temperature - measured temperature (see example)
(-) and (+) at the same time to exit
temperature interface, finished.
Example 1, when setting temperature is 350℃ while
measured temperature is 342℃, the correction steps
are as follows:
(-) and (+) at the same time to enter
temperature correction interface.
"+" button till the LCD displays 8℃
(-) and (+) at the same time to exit

Product Size

Please do not touch the soldering tip and tube when the power is turned on.

Operational Attention

Parameter setting:

the same time before it is power on, power
on,after the LCD is working,stop to press the
button, you will enter the setting
LCD shows (F) or (C)
(degree
centigrade) or F(Fahrenheit).Press the Red
button to choose Element U20(JCD01),U20(JC
D02),U30(JCD03),U40(JCD04).
(-) and (+) at the same time
to save your setting operation and quit the
setting menu(finished)
To protect the user from scald, when on the
setting menu, it will stop heating.



Failure warning indication
The LCD shows (OP): the heating element is open circuit.
Solution:
the pin of element is oxidized.
The LCD shows(E1):The outlet is poor contact,or thebattery
source interfering the soldering iron that it is power down.
Solution:
source.

Product Detail

All products are made of high quality materials and quality assurance.

Sumsour

Sumsour, a new design concept, high quality, major design and manufacturing hardware tools, a professional team to solve problems for you, thank you for your purchase.