Rated voltage 40V
Rated current 2A
It can clamp chip pins with a pitch greater than 0.3mm.
Method: Push the opening of the clip out of the same size as a single pin of the chip, and gently shake your hand while pushing it forward slightly.
Do not pull off the clip after use. Correct operation should push out the clamp, and then gently remove it from the chip pin.
Repair method of chip pin not tightly clamped:
Use tweezers to adjust the front end of the clamp so that the angle is close to about 90°.
------------------------------------------------------------------------------------------------------------------------
Productparameter:
【Model】SDK08
【Voltage】40V
【Current】2A
Patentrieght:
Sdk08testclipisabrandneworiginalproduct.
Thisproducthasbeenpatented,andcopyingisnotpermitted.
Appearancepatentnumber:8679.4
Utilitymodelpatentnumber:2838.0