AH52-1A159-CA Tyre Pressure Sensor FOR Land rover l322 2010 TPMS Tire Pressure Monitor Sensor 433mhz
ah52-1a159-ca-tyre-pressure-sensor-for-land-rover-l322-2010-tpms-tire-pressure-monitor-sensor-433mhz
ข้อมูลสินค้า
ราคา
2,691.00 1,829.88 บาท
แบรนด์
No Brand
ร้านค้า
  • Material:TIRE PRESSURE SENSOR AH52-1A159-CA
  • Model Number:TPMS TIRE PRESSURE MONITORING SYSTEM AH52-1A159-CA
  • Interchange Part Number:AH52-1A159-CA
  • Fitment Type:Direct Replacement
  • Warranty:1 Year
  • Activation Type:Scan Tool
  • There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding.
  • If you do not understand what you can contact customer service at any time, I wish you a happy shopping.

Application

For Land rover l322 2010

SPECIFICATION :

Replace For Part Number:
AH52-1A159-CA

Battery Life: ABOUT 3 YEAR
Operating Frequency: 433MHz


PACKAGE CONTENT :
NORMAL PACKET

Selling Point

Note1:
Pls Use the vehicle fitment weve provided within the body of the listing to confirm vehicle ,please send the VIN CODE to us confirm it before order.

Note2:
【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : OBDII required
Installation of TPMS is recommended to be performed only by trained professionals.




COMPREHENSIVE VEHICLE COVERAGE

Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

FAQ

Q:【 Frequently of TPMS sensor】

A: 433mhz

Q: 【Did they tpms sensor need to make program】

A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".

Q:【 Relearn Procedure 】

A:
Relearn Summary:OBD Relearn
Relearn Description
Inflate tires to correct pressure.
Read all sensor IDs and connect tpms tool to OBDII port.
Turn ignition on.
Following the prompts, continue through the process until tool indicates relearn successful.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.
คำที่เกี่ยวข้อง
433mhz switchroverเสาอากาศ 433mhzgps roverจักรยาน roverland roverkai roverblackburn roverrange rovervictorinox rover

สินค้าใกล้เคียง