TYPE 1 Features: Small size and easy to carry, more efficient. The aluminum body is 3 times more practical than plastic one and has a long service life. Lower noise when using it, suitable for 3.2mm, 4.0mm, 4.8mm rivets interface. A horde of rivets function, has a good effect of pulling that it does not waste a rivet. Can complete drilling, pulling rivets and screwing, as long as you have a drill. Labor-saving, efficient, portable, not easy to damage. Specifications: Material: alloy Color: orange Suitable rivets interface: 3.2mm, 4.0mm, 4.8mm Suitable for electric drill: 10A Riveter length: 165mm / 6.5in Riveter weight: 360g / 12.7ounce Handle length: 85mm / 3.3in Handle weight: 23g / 0.8ounce Package size: 230 * 135 * 45mm / 9.1 * 5.3 * 1.8in Package weight: 447g / 1.0lb How to use: Hold the riveter body and reverse the drill. When you hear "da da da", the screws can be inserted into the nozzle. After the installation is completed, hold the riveter body tightly, and the electric drill is turned forward to complete the pulling rivet work. The drill is reversed and the rivet pin is spat out to continue the next round of installation. Note: There are a total of 3 different sizes of nozzles in this package. Package list: 1 * Riveter Set

TYPE 2 Made of fine quality material, practical, easy to install and use, wide application range, has a long service life. Features: Alloy steel forgedhead, sturdy and practical, fast rivets. The three-jaw clip with quenching and hardening is more wear-resistant and extends the service life of the adapter. The hexagonal screw of the adapter is connected to the electric drill, which quickly transforms into an electric rivet machine and is easy to install. High-hardness hexagonal connecting rod is firmly clamped and can be used in lithium electric drill, torsion drill, hand drill, etc. Pull the rivet clockwise and pull back the rivet counterclockwise. Widely used in door and window industry, electric appliance and air conditioning production, aviation and navigation equipment, aluminum alloy and other riveting, automobile manufacturing and production. Specifications: Material: hard alloy Color: black+silver Suitable rivets interface: 2.4mm, 3.2mm, 4.0mm, 4.8mm Chuck length: 30mm / 1.2in Chuck diameter: 8mm / 0.3in Adapter total length: 143mm / 5.6in (without chuck) Wrench total length: 149mm / 5.9in Handle total length: 123mm / 4.8in Package size: 145 * 65 * 45mm / 5.7 * 2.6 * 1.8in Package weight: 451g / 1.0lb Note: Remove the cover at the bottom of the handle and have spare clips. Package list: 1 * Riveter Adapter 1 * Wrench 1 * Handle 4 * Nozzle

TYPE 3 Made of fine quality material, practical, easy to operate and use, has a long service life. Features: The housing is made of fine hardness aluminum casting material, which is more serviceable and strong. Long time work is not tired, ergonomically designed, you will not feel tired after long-term use. Alloy steel forged-head, durable, labor-saving and efficient. The handle is made of hard plastics, the surface is non slip design, not easy to slip. The fine strength link rod can better matches the drill. Easily pull the rivets, no need to spend a lot of effort, save time and effort. Easy installation: the hexagonal screw can be used after it is connected to the drill. The guide can be replaced according to the size of the rivet, easy and operation. Specifications: Main material: aluminum alloy Color: blue and black Power source: work with the electric drill Max RPM: 1000 RPM Min torque strength: 15 N.m Packing size: 190 * 140 * 30mm / 7.5 * 5.5 * 1.2in Packing weight: 460g / 1.0lb Instructions for use Adjust the electric drill to a suitable gear. Open the chuck of the electric drill, insert the adapter connector, and pass the clamp connector. Turn on the reversal function of the electric drill, and put in the rivet nails of the appropriate specification until you hear the sound of "Da Da Da". Turn on the forward rotation function again to target the punch holes and drive the rivets. Turn on the reverse function again and exit the rivet. Packing List: 1 * Riveting Adapter 1 * Auxiliary Handle 4 * Rivethead 1 * Wrench

TYPE 4 Are you still using the traditional riveter? It is time to change it. This new riveter is small and lightweight, and it has lower noise than traditional riveter, making it convenient for home and industry use. Features: Small size and easy to carry, more efficient. The aluminum body is 3 times more practical than plastic one and has a long service life. Lower noise when using it, suitable for 3.2mm, 4.0mm, 4.8mm rivets interface. A horde of rivets function, has a good effect of pulling that it does not waste a rivet. Can complete drilling, pulling rivets and screwing, as long as you have a drill. Labor-saving, efficient, portable, not easy to damage. Specifications: Material: alloy Color: yellow Suitable rivets interface: 3.2mm, 4.0mm, 4.8mm Suitable for electric drill: 10A Riveter length: 165mm / 6.5in Riveter weight: 366g / 12.9ounce Handle length: 80mm / 3.1in Handle weight: 21g / 0.7ounce Package size: 175 * 70 * 60mm / 6.9 * 2.8 * 2.4in Package weight: 459g / 1.0lb How to use: Hold the riveter body and reverse the drill. When you hear "da da da", the screws can be inserted into the nozzle. After the installation is completed, hold the riveter body tightly, and the electric drill is turned forward to complete the pulling rivet work. The drill is reversed and the rivet pin is spat out to continue the next round of installation. Note: There are a total of 3 different sizes of nozzles in this package. Package list: 1 * Riveter Set