Direct Mount for SRAM cranks - Wolf Tooth Components
ข้อมูลสินค้า
ราคา
2,900.00 บาท
รีวิว
4 ครั้ง
แบรนด์
Bike Aholic
ร้านค้า
- Wolf Tooths SDM®chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP(OFFSET 6MM), Boost(OFFSET 3MM) and BB30.(OFFSET 0MM)
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM®chainring.
- Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
- Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle)
- If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
- Design and manufactured in Minneapolis, MN USA
- Wolf Tooth’s patentedDrop-Stop®wide/narrow tooth profile for the ultimate chain retention and mud shedding abilityRecommend the use of a clutch style rear derailleur for the best chain security.
- Material 7075-T6
- Colors - black
- A T25 Torx wrench is required to remove the bolts that secure the the chainring or spider to the crankarm.AnL-wrenchworks best since the crank spindle may contact a socket adapter and prevent it from engaging properly.
- Use the same 3 bolts to attach the Wolf Tooth ring or if you need, we carryreplacement bolts
- Weight -26t - 52g, 28t - 59g, 30t - 65g, 32t - 70g, 34t - 75g, 36t - 81g, 38t - 90g, 40t - 106g, 42t - 111g