ECOOBD2 Chip Tuning Product Features:
1 EcoOBD2 finds out the hidden power of your car.
2. -Up to 15% fuel saving
3.ECOOB2 chip tuning is very easy to use
4.Plug ECO OBD2 chip tuning into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on
5.ECOOBD2 chip tuning settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment
6.ECOOBD2 chip tuning will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then Nitro chip tuning adjusts itself to match your car perfectly
ECOOBD2 / NITROOBD2 chip tuning Installation and Calibration:
1. Pull the Car Key out from the ignition
2. Find OBD2 connector(*) in your car and Plug in OBD2 Nitro chip tuning.
3. Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4. Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (Nitro OBD2 will communicate and establish connection with ECU)
5. Start up the engine
6. Nitro OBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus Nitro OBD2 will adjust itself to match your car perfectly for more fuel saving